Class
conditional
Use only SINGER Class 15 bobbins (transparent).
- Exact shared SE300/SE340 manual; no Class15J or other substitute approval.
Source evidence · 1 unique proof passage: Profile Proof E1
Singer · verified physical machine
SE300
Identity verified · evidence for each owner answer
Identity verified · evidence for each answer
Using and maintaining this machine
Check the conditions alongside each answer. Foot attachment, shank type and adapter requirements are separate; one does not establish universal accessory fit.
Bobbins and hook
Insertion orientation
conditional
Place the bobbin counterclockwise; hold it lightly while drawing thread through notch, follow the groove up and around the top, left then down; pull right to cut. Replace cover with left tabs in needle-plate holes and right side clicked down.
- Switch the sewing machine off (0) before threading the bobbin or making needle-area adjustments.; Follow the complete cited procedure; no inferred material or dimensional equivalence.
Source evidence · 2 unique proof passages: Profile Proof E1, Profile Proof E2
Needles and threading
Insertion orientation
conditional
Raise the needle fully, loosen the clamp screw and remove the old needle; insert with flat side to the back, push fully up and tighten the clamp screw. Do not use a bent or blunt needle.
- Turn off power before removing the needle. Choose appropriate style and size for the fabric.
Source evidence · 1 unique proof passage: Profile Proof E3
Oem brand recommendation
conditional
SINGER brand needles are recommended.
- Recommendation, not a universal needle-system or all-fabric size claim.
Source evidence · 1 unique proof passage: Profile Proof E3
Presser feet and adapters
Shank
conditional
Low shank; optional SINGER presser feet and accessories must be designed for low-shank models.
- No exact item, adapter, width or clearance compatibility implied.
Source evidence · 1 unique proof passage: Profile Proof E4
Changing
conditional
With needle highest and presser-foot lifter raised, push release lever toward you; place new foot pin directly under holder slot and lower lifting lever to snap into place.
- Turn off the power switch first. Select the foot appropriate to the stitch or technique.
Source evidence · 1 unique proof passage: Profile Proof E4
Features and specifications
Maximum sewing speed
conditional
800 rpm maximum.
- Literal OEM rpm; not converted to stitches per minute. Exact retained edition.
Source evidence · 1 unique proof passage: Profile Proof E5
Machine dimensions and weight
conditional
OEM labels: length 241 mm, width 512 mm, height 310 mm; net weight 8.4 kg.
- Machine values only, not embroidery-unit dimensions; labels retained without swapping length and width.
Source evidence · 1 unique proof passage: Profile Proof E5
Electrical rating
conditional
100–240 V ~ 50–60 Hz; nominal consumption 55 W.
- Exact retained manual specification, not an inferred regional cord or plug fit.
Source evidence · 1 unique proof passage: Profile Proof E5
maintenance
Lubrication
conditional
There is no need to lubricate this machine.
- Disconnect the power line plug before any maintenance; do not touch the thread cutter.
Source evidence · 1 unique proof passage: Profile Proof E6
Lighting service
conditional
The LED lamp does not require replacement; if it does not light, contact an authorized SINGER retailer for service.
- No owner lamp-replacement procedure or authorization inferred.
Source evidence · 1 unique proof passage: Profile Proof E6
embroidery
Unit connection and storage
conditional
Connect the unit with machine off, slide it firmly into socket and level if needed. For storage select Park Position, remove the hoop when prompted and confirm; after carriage parks, turn power off and remove unit.
- Hoop removal is essential before parking to avoid damage. Follow original page42 removal lever and packing instructions. No hoop-size compatibility inferred.
Source evidence · 2 unique proof passages: Profile Proof E7, Profile Proof E8
Sources for the owner answers above
Official OEM PDF
What this passage supports
- Unit connection and storage: Connect the unit with machine off, slide it firmly into socket and level if needed. For storage select Park Position, remove the hoop when prompted and confirm; after carriage parks, turn power off and remove unit.
When the pop-up message (v) appears, remove the hoop and press the “✓” button. The carriage will then move to the correct position for storage. Then, turn off the power switch and remove the unit. It is very important that the hoop is removed, otherwise it may be damaged.
- Document
- SINGER® SE300 Sewing & Embroidery Machine Manual
- Issuer
- Singer
- Extraction
- Native document text
- PDF page
- 50
- Open source
Advanced technical receipt
- Asset SHA-256
- 748213f9aa53c923e8592458caae101d551bd98d0be59497bdcda5de47a167ac
- Locator
- 19320e3c91ee88559b2e03f1f22a6ea16cb244c293ee8da62532e1284edb32fc
- Destination status
- direct_pdf
Official OEM PDF
What this passage supports
- Shank: Low shank; optional SINGER presser feet and accessories must be designed for low-shank models.
- Changing: With needle highest and presser-foot lifter raised, push release lever toward you; place new foot pin directly under holder slot and lower lifting lever to snap into place.
Turn off the power switch before you change the presser foot. This sewing machine is a low shank model. When shopping for optional SINGER presser feet and accessories, make sure they are designed for low shank models. Remove the presser foot by pushing the presser foot release lever toward you. Place desired foot with its pin directly under the slot in presser foot holder. Lower the presser foot lifting lever and the presser foot will snap into place.
- Document
- SINGER® SE300 Sewing & Embroidery Machine Manual
- Issuer
- Singer
- Extraction
- Native document text
- PDF page
- 8
- Open source
Advanced technical receipt
- Asset SHA-256
- 748213f9aa53c923e8592458caae101d551bd98d0be59497bdcda5de47a167ac
- Locator
- 1e693eb3298fcee1d16cdfd068678ff33711e57c3cc778248030a725c144e9b1
- Destination status
- direct_pdf
Official OEM PDF
What this passage supports
- Class: Use only SINGER Class 15 bobbins (transparent).
- Insertion orientation: Place the bobbin counterclockwise; hold it lightly while drawing thread through notch, follow the groove up and around the top, left then down; pull right to cut. Replace cover with left tabs in needle-plate holes and right side clicked down.
Be sure to use only SINGER Class 15 bobbins (transparent) in this machine. Place bobbin into bobbin case, making sure the bobbin turns in a counter-clockwise direction. Draw thread into notch (a) while holding the bobbin lightly with your finger. Pull thread along the groove, up and around the top, to the left, then down. Pull thread to the right to cut the thread. Replace the bobbin cover. Set the left tabs into the holes in needle plate and push the right side of bobbin cover down until it clicks into place.
- Document
- SINGER® SE300 Sewing & Embroidery Machine Manual
- Issuer
- Singer
- Extraction
- Native document text
- PDF page
- 18
- Open source
Advanced technical receipt
- Asset SHA-256
- 748213f9aa53c923e8592458caae101d551bd98d0be59497bdcda5de47a167ac
- Locator
- 496d833caf05b609e5551ddec6c9fbdd8a3295fe7fb16633d62a31a273041d42
- Destination status
- direct_pdf
Official OEM PDF
What this passage supports
- Insertion orientation: Place the bobbin counterclockwise; hold it lightly while drawing thread through notch, follow the groove up and around the top, left then down; pull right to cut. Replace cover with left tabs in needle-plate holes and right side clicked down.
This household sewing machine is designed to comply with IEC/EN 60335-2-28 and UL 1594. Switch the sewing machine off (“0”) when making any adjustment in the needle area, such as threading needle, changing needle, threading bobbin, changing presser foot, etc.
- Document
- SINGER® SE300 Sewing & Embroidery Machine Manual
- Issuer
- Singer
- Extraction
- Native document text
- PDF page
- 2
- Open source
Advanced technical receipt
- Asset SHA-256
- 748213f9aa53c923e8592458caae101d551bd98d0be59497bdcda5de47a167ac
- Locator
- 4c31e3bbd45127987d82ea8b110e6774cb0e798c3d5e49384a6b650a78dd395d
- Destination status
- direct_pdf
Official OEM PDF
What this passage supports
- Maximum sewing speed: 800 rpm maximum.
- Machine dimensions and weight: OEM labels: length 241 mm, width 512 mm, height 310 mm; net weight 8.4 kg.
- Electrical rating: 100–240 V ~ 50–60 Hz; nominal consumption 55 W.
Rated voltage 100–240V ~ 50–60Hz Nominal consumption 55W Sewing speed 800 rpm maximum Length (mm) 241 Width (mm) 512 Height (mm) 310 Net weight (kg) 8.4
- Document
- SINGER® SE300 Sewing & Embroidery Machine Manual
- Issuer
- Singer
- Extraction
- Native document text
- PDF page
- 58
- Open source
Advanced technical receipt
- Asset SHA-256
- 748213f9aa53c923e8592458caae101d551bd98d0be59497bdcda5de47a167ac
- Locator
- 6bebd276ce3ed04508ab81c7b9ff519949777c88456d72e5d2583f8e414c1e26
- Destination status
- direct_pdf
Official OEM PDF
What this passage supports
- Insertion orientation: Raise the needle fully, loosen the clamp screw and remove the old needle; insert with flat side to the back, push fully up and tighten the clamp screw. Do not use a bent or blunt needle.
- Oem brand recommendation: SINGER brand needles are recommended.
SINGER brand needles are recommended for this machine. Turn off the power before removing the needle. Insert new needle into needle clamp with the flat side to the back and push it up as far as it will go. Tighten the needle clamp screw. Do not use a bent or blunt needle
- Document
- SINGER® SE300 Sewing & Embroidery Machine Manual
- Issuer
- Singer
- Extraction
- Native document text
- PDF page
- 9
- Open source
Advanced technical receipt
- Asset SHA-256
- 748213f9aa53c923e8592458caae101d551bd98d0be59497bdcda5de47a167ac
- Locator
- 81d620cbb1db6d2584033222bdd3333a0cfaa6a8ba5e1bfb427b286235afdce0
- Destination status
- direct_pdf
Official OEM PDF
What this passage supports
- Lubrication: There is no need to lubricate this machine.
- Lighting service: The LED lamp does not require replacement; if it does not light, contact an authorized SINGER retailer for service.
disconnect the power line plug from the electric outlet before carrying out any maintenance. do not touch the thread cutter unit (a). There is no need to lubricate this machine. An LED lamp is used to illuminate the stitching area. It does not require replacement. In the unlikely event it does not light up, call your authorized SINGER retailer for service. Clean the hook race, feed dogs and bobbin holder with a brush. Also clean them, using a soft, dry cloth.
- Document
- SINGER® SE300 Sewing & Embroidery Machine Manual
- Issuer
- Singer
- Extraction
- Native document text
- PDF page
- 56
- Open source
Advanced technical receipt
- Asset SHA-256
- 748213f9aa53c923e8592458caae101d551bd98d0be59497bdcda5de47a167ac
- Locator
- b2b5d45ab9417c7fc4bd8037ef82a7cacf74202dc198c791f0838b6cb5fca241
- Destination status
- direct_pdf
Official OEM PDF
What this passage supports
- Unit connection and storage: Connect the unit with machine off, slide it firmly into socket and level if needed. For storage select Park Position, remove the hoop when prompted and confirm; after carriage parks, turn power off and remove unit.
Turn the machine off before connecting the embroidery unit. Slide the embroidery unit onto the arm of the machine until it plugs firmly into the socket. If needed, use the level adjusting feet so that the machine and embroidery unit are even with one another.
- Document
- SINGER® SE300 Sewing & Embroidery Machine Manual
- Issuer
- Singer
- Extraction
- Native document text
- PDF page
- 42
- Open source
Advanced technical receipt
- Asset SHA-256
- 748213f9aa53c923e8592458caae101d551bd98d0be59497bdcda5de47a167ac
- Locator
- e122131459a1cfe180e06d28ca503b06e480454a6e54f04581d64facf91681ed
- Destination status
- direct_pdf
Machine facets and OEM groups
Cited machine facets
Identity and compatibility badges
Identity families, physical traits, and OEM accessory groups stay separate. A group badge applies only to its named program and domains.
OEM group · accessory, presser footSINGER Accessory M/C Code: SINGER M/C Code EB
Detailed specifications, compatible parts, and source library
Evidence coverage
Core answers and cited items
Machine category: Not yet established
Core domains answered: None yet
Domains with cited compatible items: presser foot (6)
Unknown is not incompatible. A missing answer means the current official evidence does not support one yet.
Parts & accessories
6 documented relationships
A two-hop result joins the machine’s official accessory-group membership to the OEM part matrix. Open the evidence to inspect both hops.
6 relationships shown
presser foot · 6
CORDING FOOT
250006345
250006345
compatible two-hop OEM matrix
Why this fits
Two cited hops: this machine is in SINGER Accessory M/C Code · SINGER M/C Code EB, and the OEM matrix lists this part for that group. Edition 2022. Region global_en. Applies to presser foot only.
Inspect complete evidence path · 2 unique proof passages: Step 1 E4, Step 2 E5
1/4” FOOT WITH GUIDE
250051996
250051996
compatible two-hop OEM matrix
Why this fits
Two cited hops: this machine is in SINGER Accessory M/C Code · SINGER M/C Code EB, and the OEM matrix lists this part for that group. Edition 2022. Region global_en. Applies to presser foot only.
Inspect complete evidence path · 2 unique proof passages: Step 1 E4, Step 2 E6
PARALLEL SEWING FOOT
250059896
250059896
compatible two-hop OEM matrix
Why this fits
Two cited hops: this machine is in SINGER Accessory M/C Code · SINGER M/C Code EB, and the OEM matrix lists this part for that group. Edition 2022. Region global_en. Applies to presser foot only.
Inspect complete evidence path · 2 unique proof passages: Step 1 E4, Step 2 E7
FREE MOTION / DARNING FOOT
250059996
250059996
compatible two-hop OEM matrix
Why this fits
Two cited hops: this machine is in SINGER Accessory M/C Code · SINGER M/C Code EB, and the OEM matrix lists this part for that group. Edition 2022. Region global_en. Applies to presser foot only.
Inspect complete evidence path · 2 unique proof passages: Step 1 E4, Step 2 E8
EVEN FEED FOOT
250060096
250060096
compatible two-hop OEM matrix
Why this fits
Two cited hops: this machine is in SINGER Accessory M/C Code · SINGER M/C Code EB, and the OEM matrix lists this part for that group. Edition 2022. Region global_en. Applies to presser foot only.
Inspect complete evidence path · 2 unique proof passages: Step 1 E4, Step 2 E9
SATIN STITCH FOOT
250060296
250060296
compatible two-hop OEM matrix
Why this fits
Two cited hops: this machine is in SINGER Accessory M/C Code · SINGER M/C Code EB, and the OEM matrix lists this part for that group. Edition 2022. Region global_en. Applies to presser foot only.
Inspect complete evidence path · 2 unique proof passages: Step 1 E4, Step 2 E10
OEM compatibility programs
Documented group memberships
Group codes are namespaced to the issuing OEM program and apply only to the cited domains. They are not machine series and do not prove compatibility outside those domains.
SINGER M/C Code EB
SINGER Accessory M/C Code · code EB
Applies to: accessory, presser foot
View machine-to-group evidence · 1 unique proof passage: Proof E4
Official source library
Documents used on this page
Open the exact OEM PDF page or captured HTML edition when a safe destination exists; otherwise SewGraph labels the OEM support-page fallback honestly.
Evidence library
10 exact proof passages from 2 OEM documents
Every passage below says exactly what visible fact it proves. Repeated references to the same locator are counted once; identity evidence never counts as compatibility evidence.
Open exact proof passages · 10 unique proof passages
Official OEM PDF
What this passage proves
- Identity — preferred display name: SE300
- Identity — model code: SE300
SE300
- Document
- Singer 2022 Accessory User Guide
- Issuer
- Singer
- Extraction
- native
- PDF page
- 7
- Open source
Advanced technical receipt
- Asset SHA-256
- 073ab787ff23a806c6ae9593ace16eee9394237ae4a38fa0db5a9e82c068d965
- Locator
- fa51394a11c42840c916935714a99ad04d29d5ad36e4e7c6d3058f11f7546331
- Destination status
- direct_pdf
Official OEM PDF
What this passage proves
- Identity — printed machine name: SE300
SINGER® Refurbished Legacy™ SE300 Sewing & Embroidery Machine
- Document
- Singer SE300 product page (archived 2025-06-22)
- Issuer
- Singer
- Extraction
- native
- Evidence edition
- Archived OEM HTML · 2025-06-22T18:50:14+00:00
- Open source
Advanced technical receipt
- Asset SHA-256
- cbff5a808a08c1c3dc24531d8a7b7c633ad23d7624312c19fd8562a8946bedc1
- Locator
- 60f4a1a40477163f7e6407ce2addd01c668ca7bcc170d02616c9dba9d1e6fae8
- Destination status
- archived_html
Official OEM PDF
What this passage proves
- Identity — printed machine name: SE300
SE300
- Document
- Singer 2022 Accessory User Guide
- Issuer
- Singer
- Extraction
- native
- PDF page
- 7
- Open source
Advanced technical receipt
- Asset SHA-256
- 073ab787ff23a806c6ae9593ace16eee9394237ae4a38fa0db5a9e82c068d965
- Locator
- f793481ad731311e9a095b40c86d99b7a3a79b758ac360107e426b70336bf155
- Destination status
- direct_pdf
Official OEM PDF
What this passage proves
- OEM program membership — SINGER Accessory M/C Code: SINGER M/C Code EB
- Item fitment path — this machine's OEM group membership for CORDING FOOT
- Item fitment path — this machine's OEM group membership for 1/4” FOOT WITH GUIDE
- Item fitment path — this machine's OEM group membership for PARALLEL SEWING FOOT
- Item fitment path — this machine's OEM group membership for FREE MOTION / DARNING FOOT
- Item fitment path — this machine's OEM group membership for EVEN FEED FOOT
- Item fitment path — this machine's OEM group membership for SATIN STITCH FOOT
EB Series IEF RANGE Superb / Legacy C240 EM200 SE300
- Document
- Singer 2022 Accessory User Guide
- Issuer
- Singer
- Extraction
- native
- PDF page
- 7
- Open source
Advanced technical receipt
- Asset SHA-256
- 073ab787ff23a806c6ae9593ace16eee9394237ae4a38fa0db5a9e82c068d965
- Locator
- 0f56e99c9079a4025c447ff53e06da0e48dc9dd8707a7fdcec7472283be5d071
- Destination status
- direct_pdf
Official OEM PDF
What this passage proves
- Item fitment — presser foot: CORDING FOOT (compatible)
#250006345 M/C Code: CA, EA, EB
- Document
- Singer 2022 Accessory User Guide
- Issuer
- Singer
- Extraction
- native
- PDF page
- 20
- Open source
Advanced technical receipt
- Asset SHA-256
- 073ab787ff23a806c6ae9593ace16eee9394237ae4a38fa0db5a9e82c068d965
- Locator
- dbba345a75d909af3976334bfa916423848737231bdd90a96e1cdbb2690340c2
- Destination status
- direct_pdf
Official OEM PDF
What this passage proves
- Item fitment — presser foot: 1/4” FOOT WITH GUIDE (compatible)
#250051996 M/C Code: CA, CB, CC, EA, EB,
- Document
- Singer 2022 Accessory User Guide
- Issuer
- Singer
- Extraction
- native
- PDF page
- 29
- Open source
Advanced technical receipt
- Asset SHA-256
- 073ab787ff23a806c6ae9593ace16eee9394237ae4a38fa0db5a9e82c068d965
- Locator
- 8c066a34bfd33d8855f4f7f71bb1b380e70f8b3cbea9d7682b7fa579df222cb1
- Destination status
- direct_pdf
Official OEM PDF
What this passage proves
- Item fitment — presser foot: PARALLEL SEWING FOOT (compatible)
#250059896 M/C Code: MA, MB, CA, CB, CC, EA, EB,
- Document
- Singer 2022 Accessory User Guide
- Issuer
- Singer
- Extraction
- native
- PDF page
- 21
- Open source
Advanced technical receipt
- Asset SHA-256
- 073ab787ff23a806c6ae9593ace16eee9394237ae4a38fa0db5a9e82c068d965
- Locator
- cf5c4990074647eb6310a26071609f45b341d0a52cdab4c32a1eddca4325f242
- Destination status
- direct_pdf
Official OEM PDF
What this passage proves
- Item fitment — presser foot: FREE MOTION / DARNING FOOT (compatible)
#250059996 M/C Code: MA, MB, CA, CB, CC, EA, EB,
- Document
- Singer 2022 Accessory User Guide
- Issuer
- Singer
- Extraction
- native
- PDF page
- 30
- Open source
Advanced technical receipt
- Asset SHA-256
- 073ab787ff23a806c6ae9593ace16eee9394237ae4a38fa0db5a9e82c068d965
- Locator
- a73e4907eb077ff4a91b79f3467871a6709ba4aabbd9eb08c330c118de2dccf3
- Destination status
- direct_pdf
Official OEM PDF
What this passage proves
- Item fitment — presser foot: EVEN FEED FOOT (compatible)
#250060096 M/C Code: MA, MB, CA, CB, CC, EA, EB,
- Document
- Singer 2022 Accessory User Guide
- Issuer
- Singer
- Extraction
- native
- PDF page
- 31
- Open source
Advanced technical receipt
- Asset SHA-256
- 073ab787ff23a806c6ae9593ace16eee9394237ae4a38fa0db5a9e82c068d965
- Locator
- 84786758940c08882238aeb830c6647d572ec8c7c26133c60d5fe81cb53a0923
- Destination status
- direct_pdf
Official OEM PDF
What this passage proves
- Item fitment — presser foot: SATIN STITCH FOOT (compatible)
#250060296 M/C Code: MA, MB, CA, CB, CC, EA, EB,
- Document
- Singer 2022 Accessory User Guide
- Issuer
- Singer
- Extraction
- native
- PDF page
- 22
- Open source
Advanced technical receipt
- Asset SHA-256
- 073ab787ff23a806c6ae9593ace16eee9394237ae4a38fa0db5a9e82c068d965
- Locator
- 2cd6724c8e7d11e77b6dd83d2bc4e5a1519bc7bab09b49c0970358c31062323a
- Destination status
- direct_pdf
Official OEM PDF
What this passage proves
- Identity — preferred display name: SE300
SE300
- Document
- SINGER® SE300 Sewing & Embroidery Machine Manual
- Issuer
- Singer
- Extraction
- Native document text
- PDF page
- 1
- Open source
Advanced technical receipt
- Asset SHA-256
- 748213f9aa53c923e8592458caae101d551bd98d0be59497bdcda5de47a167ac
- Locator
- b0536f6b0a4269bf4f06c3cd7d18f45563b0f9cbbe4336b3631cb3b4c981631b
- Destination status
- direct_pdf
Official OEM PDF
What this passage proves
- Identity — model code: SE300
SE300
- Document
- SINGER® SE300 Sewing & Embroidery Machine Manual
- Issuer
- Singer
- Extraction
- Native document text
- PDF page
- 1
- Open source
Advanced technical receipt
- Asset SHA-256
- 748213f9aa53c923e8592458caae101d551bd98d0be59497bdcda5de47a167ac
- Locator
- e133a1ce6397a7b93a347380c4c15f0f260195ad7f405aeb12f79f8ba861ccf8
- Destination status
- direct_pdf
What is supported, and what remains open?
0 supported answers and 12 answers with conditions or remaining limits. Evidence coverage is not a probability of accuracy.
Unresolved owner questions (1)
- System: Not established — Not yet verified: No single universal needle system established; fabric-specific chart is not generalized.
Advanced provenance and dataset receipt
Public snapshot a1cc1aceef228fcf33329e37165ab888ce5b9fe3f13eb56967ae0fbf41d8d8a7
Catalog e156281c7d3048027b5ac89e7476be8f54dd5a9309505e96260b0455d3cd2a7e · exact native quotes only · dossier method sewgraph-model-dossier-v2