Identity verified · evidence for each owner answer
Identity verified · evidence for each answer
Using and maintaining this machine
Check the conditions alongside each answer. Foot attachment, shank type and adapter requirements are separate; one does not establish universal accessory fit.
Bobbins and hook
Winder safety
conditional
The manual says the machine will not sew while the bobbin-winder spindle is engaged; move it left to sewing position after winding stops automatically.
Applies to the manual's winding procedure, not a bobbin-class or substitute claim.
With power off and the needle raised, insert the bobbin so its thread turns it counterclockwise as illustrated; leave about 15 cm of thread outside the needle plate.
Follow the manual's illustrated case and tension-slot route; dimensions and interchangeability are unknown.
Winder safety: The manual says the machine will not sew while the bobbin-winder spindle is engaged; move it left to sewing position after winding stops automatically.
Encha a Bobina
parada
automática.
costurar,
esquerda
Four step buttonhole: The 5511 uses the manual's four-step buttonhole procedure; test stitch density on a scrap of the same fabric before sewing the garment.
Casa de Botão de 4 Passos (exclusivo dos modelos 4411 e 5511)
teste,
Replacement orientation: With power off and an original Singer needle, insert the replacement fully with its flat side to the rear, then tighten the needle-clamp screw.
Use sempre agulhas originais Singer.
B. O lado chato do cabo da agulha deve ficar sempre para trás.
C. Insira a agulha o máximo possível, antes de apertar o parafuso.
D. Aperte o parafuso.
Atenção: Desligue a máquina, sempre que for trocar a agulha.
Insertion direction: With power off and the needle raised, insert the bobbin so its thread turns it counterclockwise as illustrated; leave about 15 cm of thread outside the needle plate.
Coloque a Bobina na Caixa da Bobina
anti
horário
15cm
Desligue
Domains with cited compatible items: presser foot (8)
bobbin
Not yet reviewed
needle
Not yet reviewed
presser foot
8 cited items; core not established
Unknown is not incompatible. A missing answer means the current official evidence does not support one yet.
Parts & accessories
8 documented relationships
A two-hop result joins the machine’s official accessory-group membership to the OEM part matrix. Open the evidence to inspect both hops.
8 relationships shown
presser foot · 8
FRINGE FOOT 250013901
compatibletwo-hop OEM matrix
Why this fits
Two cited hops: this machine is in SINGER Accessory M/C Code · SINGER M/C Code MB, and the OEM matrix lists this part for that group. Edition 2022. Region global_en. Applies to presser foot only.
Two cited hops: this machine is in SINGER Accessory M/C Code · SINGER M/C Code MB, and the OEM matrix lists this part for that group. Edition 2022. Region global_en. Applies to presser foot only.
Two cited hops: this machine is in SINGER Accessory M/C Code · SINGER M/C Code MB, and the OEM matrix lists this part for that group. Edition 2022. Region global_en. Applies to presser foot only.
Two cited hops: this machine is in SINGER Accessory M/C Code · SINGER M/C Code MB, and the OEM matrix lists this part for that group. Edition 2022. Region global_en. Applies to presser foot only.
Two cited hops: this machine is in SINGER Accessory M/C Code · SINGER M/C Code MB, and the OEM matrix lists this part for that group. Edition 2022. Region global_en. Applies to presser foot only.
Two cited hops: this machine is in SINGER Accessory M/C Code · SINGER M/C Code MB, and the OEM matrix lists this part for that group. Edition 2022. Region global_en. Applies to presser foot only.
Two cited hops: this machine is in SINGER Accessory M/C Code · SINGER M/C Code MB, and the OEM matrix lists this part for that group. Edition 2022. Region global_en. Applies to presser foot only.
Two cited hops: this machine is in SINGER Accessory M/C Code · SINGER M/C Code MB, and the OEM matrix lists this part for that group. Edition 2022. Region global_en. Applies to presser foot only.
Group codes are namespaced to the issuing OEM program and apply only to the cited domains. They are not machine series and do not prove compatibility outside those domains.
Open official source destination · 1 unique proof passage:Proof E1
Singer 2022 Accessory User Guide
accessory compatibility
Open official source destination · 1 unique proof passage:Proof E2
Evidence library
15 exact proof passages from 2 OEM documents
Every passage below says exactly what visible fact it proves. Repeated references to the same locator are counted once; identity evidence never counts as compatibility evidence.
Open exact proof passages · 15 unique proof passages
0 supported answers and 5 answers with conditions or remaining limits. Evidence coverage is not a probability of accuracy.
Unresolved owner questions (2)
Class and substitutes: Not established — Not yet verified: The inspected pages do not establish a standardized bobbin class, dimensions or substitute fit.
Mount and fit: Not established — Not yet verified: The prior Singer 5511 presser-foot core claim remains held; this packet does not resolve that page-49 provenance gate or establish a mount or compatible item.