Check the conditions alongside each answer. Foot attachment, shank type and adapter requirements are separate; one does not establish universal accessory fit.
Needles and threading
System and sizes
conditional
The manual specifies DP × 17 needles in sizes #14–18, with #16 as standard.
Use the specified needles. Turn power off before replacement and keep fingers away from the center-knife blade. No alternative needle system or substitution is established.
For both needles, face the long grooves inward toward each other, insert fully to the back of the needle mounting holes, and secure with the needle-clamp screws.
Turn power off before changing needles; keep fingers away from the center-knife blade. Use the specified DP × 17 #14–18 needles (#16 standard).
Hold the bobbin with its thread winding to the right as illustrated and insert it into the bobbin case; route the thread through the case's threading groove and under the tension spring.
Turn power off before handling/installing the case. This is the case-threading step only, not the entire removal/installation procedure. Follow the complete illustrated manual; no clockwise/counterclockwise reinterpretation from an unspecified viewpoint.
Use the specified JUKI MACHINE OIL No. 1 (MDFRX1600C0) for lubricating the sewing machine.
Turn power off before this maintenance operation. No other oil, substitute or lubrication location/quantity is established by this fact; follow the full manual.
Cleaning intervals: Clean dust from machine details such as the large clamp before starting work; clean cutting scraps inside the hook cover once each week.
Specified oil: Use the specified JUKI MACHINE OIL No. 1 (MDFRX1600C0) for lubricating the sewing machine.
System and sizes: The manual specifies DP × 17 needles in sizes #14–18, with #16 as standard.
Insertion orientation: For both needles, face the long grooves inward toward each other, insert fully to the back of the needle mounting holes, and secure with the needle-clamp screws.
Case threading: Hold the bobbin with its thread winding to the right as illustrated and insert it into the bobbin case; route the thread through the case's threading groove and under the tension spring.
Unknown is not incompatible. A missing answer means the current official evidence does not support one yet.
Specifications
Documented machine facts
Multiple cited representations for one field share one row. SewGraph preserves every value and exact proof passage; it does not guess which representation is “raw” or “normalized” when the public projection does not label that distinction.
Open the exact OEM PDF page or captured HTML edition when a safe destination exists; otherwise SewGraph labels the OEM support-page fallback honestly.
JUKI 2025 apparel general catalog
machine catalog
Open official source destination · 1 unique proof passage:Proof E2
APW-895N/IP-420 instruction manual (Japanese)
instruction
Open official source destination · 1 unique proof passage:Proof E1
Evidence library
8 exact proof passages from 2 OEM documents
Every passage below says exactly what visible fact it proves. Repeated references to the same locator are counted once; identity evidence never counts as compatibility evidence.
Open exact proof passages · 8 unique proof passages
本機は、 A 本体構造機構部（本体骨組み、縫製テーブル、各種カバー、フットスイッチなど）
B 大押えユニット、縫製送り部
C コーナーメスユニット部
D バインダーユニット部（バインダー機構およびバインダー駆動機構など）
E 空気制御機器部（エアー機器およびエアー配管など）
F スタッカーユニット部（オプション）
G ミシン部
H 制御装置（制御盤）
I 操作パネル部
J 電源スイッチ（非常停止スイッチ兼用）
K 途中停止スイッチ
上記、11 部分により構成され、生地（身頃、芯地、玉布など）を所定位置へセットするだけで、ペダ
ル操作により希望の玉縁縫製を自動で行うことができます。
0 supported answers and 5 answers with conditions or remaining limits. Evidence coverage is not a probability of accuracy.
Unresolved owner questions (2)
System: Not established — Not yet verified: Standardized bobbin class/system, dimensions, material and interchangeable cases are not established by the threading direction.
Standardized fit: Not established — Not yet verified: No standardized presser-foot/shank/adapter or general item fitment is established.