Standard accessory
supported
Bobbins are listed among the standard accessories.
Source evidence · 1 unique proof passage: Profile Proof E1
janome · verified physical machine
423S
verified exact machine · core systems pending
Identity verified · evidence for each answer
Using and maintaining this machine
Check the conditions alongside each answer. Foot attachment, shank type and adapter requirements are separate; one does not establish universal accessory fit.
Bobbins and hook
Removable case procedure
conditional
Open the hook cover, raise the needle by turning the handwheel toward you, and take out the bobbin case by its latch. When inserting the case, place its horn into the hook-race recess.
- This is the manual's handling procedure, not a bobbin system or interchangeability claim.
Source evidence · 1 unique proof passage: Profile Proof E2
Threading
conditional
Place the bobbin in the case with the thread unwinding in the illustrated arrow direction. Pull the thread into the case slot, under the tension spring and into the delivery eye; leave about 10 cm (4 inches) free.
- Follow the direction illustrated on printed page 8; no clockwise/counterclockwise label is inferred.
Source evidence · 1 unique proof passage: Profile Proof E3
Needles and threading
Standard accessory
supported
A set of needles is listed among the standard accessories.
Source evidence · 1 unique proof passage: Profile Proof E1
Size chart
conditional
The needle-and-thread chart lists sizes 9/65, 11/75, 14/90 and 16/100 for different fabric and thread combinations.
- Choose the size for the fabric/thread combination in the manual chart; test on a piece of the actual sewing fabric.
Source evidence · 1 unique proof passage: Profile Proof E4
Stretch fabric guidance
conditional
Use a blue-tipped needle when sewing stretch, very fine fabrics and synthetics.
- This guidance is conditional on those fabric types and does not identify a formal needle system.
Source evidence · 1 unique proof passage: Profile Proof E4
Insertion
conditional
Insert the needle with its flat side away from you, push it up as far as it will go, and tighten the clamp screw firmly with the screwdriver.
- Raise the needle by turning the handwheel toward you, lower the presser foot, and loosen the clamp screw counterclockwise before removing the old needle.
Source evidence · 1 unique proof passage: Profile Proof E4
Presser feet and adapters
Standard accessories
supported
A zipper foot, automatic buttonhole foot and hemmer foot are listed as standard accessories.
Source evidence · 1 unique proof passage: Profile Proof E1
Holder attachment
conditional
Place the presser-foot pin just under the holder groove, then lower the holder to lock the foot in place.
- To remove the foot first, raise the needle to its highest position by turning the handwheel toward you, raise the presser foot, and press the lever on the back of the holder.
Source evidence · 1 unique proof passage: Profile Proof E5
Sources for the owner answers above
Official OEM PDF
What this passage supports
- Threading: Place the bobbin in the case with the thread unwinding in the illustrated arrow direction. Pull the thread into the case slot, under the tension spring and into the delivery eye; leave about 10 cm (4 inches) free.
Place the bobbin into the bobbin case. Make sure the thread unwinds in the direction of arrow. Pull the thread into the bobbin case slot. Draw the thread under the tension spring and into the delivery eye. Leave about 10 cm (4") of free thread.
- Document
- Janome 423s
- Issuer
- Janome
- Extraction
- Native document text
- PDF page
- 10
- Open source
Advanced technical receipt
- Asset SHA-256
- 6d65cc7c465c8ff16943894afa8ad671cb0fbff51ef8e53479b57655a3c03a0f
- Locator
- 14346e73f8fe3857d0ae38a8a86db4280b6aa27180b79af0e312ab8001c1a0b4
- Destination status
- direct_pdf
Official OEM PDF
What this passage supports
- Holder attachment: Place the presser-foot pin just under the holder groove, then lower the holder to lock the foot in place.
Turn the handwheel toward you to raise the needle to its highest position. Raise the presser foot. Press the lever on the back of the foot holder. Place the presser foot so the pin on the foot lies just under the groove of the foot holder. Lower the foot holder to lock the foot in place.
- Document
- Janome 423s
- Issuer
- Janome
- Extraction
- Native document text
- PDF page
- 7
- Open source
Advanced technical receipt
- Asset SHA-256
- 6d65cc7c465c8ff16943894afa8ad671cb0fbff51ef8e53479b57655a3c03a0f
- Locator
- 947782742a365fe44bbb04d4b51daacfd3174462e85cc1046bac24eec3f60b49
- Destination status
- direct_pdf
Official OEM PDF
What this passage supports
- Removable case procedure: Open the hook cover, raise the needle by turning the handwheel toward you, and take out the bobbin case by its latch. When inserting the case, place its horn into the hook-race recess.
Open the hook cover. Raise the needle by turning the handwheel toward you. Take out the bobbin case by holding the latch. When inserting the bobbin case, place the horn into the recess of the hook race.
- Document
- Janome 423s
- Issuer
- Janome
- Extraction
- Native document text
- PDF page
- 9
- Open source
Advanced technical receipt
- Asset SHA-256
- 6d65cc7c465c8ff16943894afa8ad671cb0fbff51ef8e53479b57655a3c03a0f
- Locator
- 9667e1319a9df57c0d8146dc63d7e10445c937486ae8ea73c02b009c34d92f29
- Destination status
- direct_pdf
Official OEM PDF
What this passage supports
- Standard accessory: Bobbins are listed among the standard accessories.
- Standard accessory: A set of needles is listed among the standard accessories.
- Standard accessories: A zipper foot, automatic buttonhole foot and hemmer foot are listed as standard accessories.
Standard Accessories 1 Zipper foot 2 Automatic buttonhole foot 3 Hemmer foot 4 Bobbins 5 Set of needles
- Document
- Janome 423s
- Issuer
- Janome
- Extraction
- Native document text
- PDF page
- 5
- Open source
Advanced technical receipt
- Asset SHA-256
- 6d65cc7c465c8ff16943894afa8ad671cb0fbff51ef8e53479b57655a3c03a0f
- Locator
- a3a38794414cac96d99fbe3c0d45027bee8872695bacd88d59c83b86b6d7c54b
- Destination status
- direct_pdf
Official OEM PDF
What this passage supports
- Size chart: The needle-and-thread chart lists sizes 9/65, 11/75, 14/90 and 16/100 for different fabric and thread combinations.
- Stretch fabric guidance: Use a blue-tipped needle when sewing stretch, very fine fabrics and synthetics.
- Insertion: Insert the needle with its flat side away from you, push it up as far as it will go, and tighten the clamp screw firmly with the screwdriver.
Insert a new needle into the clamp with the flat side away from you. When inserting the needle into the clamp, push it up as far as it will go and tighten the clamp screw firmly with the screwdriver. When sewing stretch, very fine fabrics and synthetics,use a BLUE TIPPED needle. Always test thread and needle size on a small piece of fabric which will be used for actual sewing. 9/65 11/75 14/90 16/100
- Document
- Janome 423s
- Issuer
- Janome
- Extraction
- Native document text
- PDF page
- 8
- Open source
Advanced technical receipt
- Asset SHA-256
- 6d65cc7c465c8ff16943894afa8ad671cb0fbff51ef8e53479b57655a3c03a0f
- Locator
- f5ffafa3539f2648370b0077201b7423a58ee7945f2336b6dccf4a969b7aa845
- Destination status
- direct_pdf
Machine facets and OEM groups
Cited machine facets
Identity and compatibility badges
Identity families, physical traits, and OEM accessory groups stay separate. A group badge applies only to its named program and domains.
hook typeOscillating hookmaximum stitch width mm5integrated dual feed systemNobobbin loading styleFront loadingOEM group · accessory, presser footJanome Accessory Compatibility Category: Janome Category G
Detailed specifications, compatible parts, and source library
Evidence coverage
Core answers and cited items
Machine category: Not yet established
Core domains answered: None yet
Domains with cited compatible items: presser foot (14)
Unknown is not incompatible. A missing answer means the current official evidence does not support one yet.
Specifications
Documented machine facts
Multiple cited representations for one field share one row. SewGraph preserves every value and exact proof passage; it does not guess which representation is “raw” or “normalized” when the public projection does not label that distinction.
Parts & accessories
15 documented relationships
A two-hop result joins the machine’s official accessory-group membership to the OEM part matrix. Open the evidence to inspect both hops.
15 relationships shown
presser foot · 14
3-WAY CORDING FOOT
200-126-009
200-126-009
compatible two-hop OEM matrix
Why this fits
Two cited hops: this machine is in Janome Accessory Compatibility Category · Janome Category G, and the OEM matrix lists this part for that group. Region global_en. Applies to presser foot only.
Inspect complete evidence path · 2 unique proof passages: Step 1 E5, Step 2 E6
ZIPPER FOOT
940-290-000
940-290-000
compatible two-hop OEM matrix
Why this fits
Two cited hops: this machine is in Janome Accessory Compatibility Category · Janome Category G, and the OEM matrix lists this part for that group. Region global_en. Applies to presser foot only.
Inspect complete evidence path · 2 unique proof passages: Step 1 E5, Step 2 E8
CONCEAL ‰ ZIPPER FOOT
941-800-000
941-800-000
compatible two-hop OEM matrix
Why this fits
Two cited hops: this machine is in Janome Accessory Compatibility Category · Janome Category G, and the OEM matrix lists this part for that group. Region global_en. Applies to presser foot only.
Inspect complete evidence path · 2 unique proof passages: Step 1 E5, Step 2 E9
TRICOT FOOT
202-509-006
202-509-006
compatible two-hop OEM matrix
Why this fits
Two cited hops: this machine is in Janome Accessory Compatibility Category · Janome Category G, and the OEM matrix lists this part for that group. Region global_en. Applies to presser foot only.
Inspect complete evidence path · 2 unique proof passages: Step 1 E5, Step 2 E10
SLIDING BUTTONHOLE FOOT
200-134-000
200-134-000
compatible two-hop OEM matrix
Why this fits
Two cited hops: this machine is in Janome Accessory Compatibility Category · Janome Category G, and the OEM matrix lists this part for that group. Region global_en. Applies to presser foot only.
Inspect complete evidence path · 2 unique proof passages: Step 1 E5, Step 2 E11
GATHERING FOOT
200-124-007
200-124-007
compatible two-hop OEM matrix
Why this fits
Two cited hops: this machine is in Janome Accessory Compatibility Category · Janome Category G, and the OEM matrix lists this part for that group. Region global_en. Applies to presser foot only.
Inspect complete evidence path · 2 unique proof passages: Step 1 E5, Step 2 E12
HEMMER FOOT
202-477-004
202-477-004
compatible two-hop OEM matrix
Why this fits
Two cited hops: this machine is in Janome Accessory Compatibility Category · Janome Category G, and the OEM matrix lists this part for that group. Region global_en. Applies to presser foot only.
Inspect complete evidence path · 2 unique proof passages: Step 1 E5, Step 2 E13
1/4 INCH SEAM FOOT
200-330-008
200-330-008
compatible two-hop OEM matrix
Why this fits
Two cited hops: this machine is in Janome Accessory Compatibility Category · Janome Category G, and the OEM matrix lists this part for that group. Region global_en. Applies to presser foot only.
Inspect complete evidence path · 2 unique proof passages: Step 1 E5, Step 2 E14
BUTTON SEWING FOOT
200-131-007
200-131-007
compatible two-hop OEM matrix
Why this fits
Two cited hops: this machine is in Janome Accessory Compatibility Category · Janome Category G, and the OEM matrix lists this part for that group. Region global_en. Applies to presser foot only.
Inspect complete evidence path · 2 unique proof passages: Step 1 E5, Step 2 E15
OVERCASTING FOOT / OVEREDGE FOOT
200-132-008
200-132-008
compatible two-hop OEM matrix
Why this fits
Two cited hops: this machine is in Janome Accessory Compatibility Category · Janome Category G, and the OEM matrix lists this part for that group. Region global_en. Applies to presser foot only.
Inspect complete evidence path · 2 unique proof passages: Step 1 E5, Step 2 E16
BLIND HEM FOOT
200-130-006
200-130-006
compatible two-hop OEM matrix
Why this fits
Two cited hops: this machine is in Janome Accessory Compatibility Category · Janome Category G, and the OEM matrix lists this part for that group. Region global_en. Applies to presser foot only.
Inspect complete evidence path · 2 unique proof passages: Step 1 E5, Step 2 E17
SLIDING BUTTONHOLE FOOT
200-123-006
200-123-006
compatible two-hop OEM matrix
Why this fits
Two cited hops: this machine is in Janome Accessory Compatibility Category · Janome Category G, and the OEM matrix lists this part for that group. Region global_en. Applies to presser foot only.
Inspect complete evidence path · 2 unique proof passages: Step 1 E5, Step 2 E18
CONCEAL ‰ ZIPPER FOOT
202-475-002
202-475-002
compatible two-hop OEM matrix
Why this fits
Two cited hops: this machine is in Janome Accessory Compatibility Category · Janome Category G, and the OEM matrix lists this part for that group. Region global_en. Applies to presser foot only.
Inspect complete evidence path · 2 unique proof passages: Step 1 E5, Step 2 E19
HEMMER FOOT
202-044-008
202-044-008
compatible two-hop OEM matrix
Why this fits
Two cited hops: this machine is in Janome Accessory Compatibility Category · Janome Category G, and the OEM matrix lists this part for that group. Region global_en. Applies to presser foot only.
Inspect complete evidence path · 2 unique proof passages: Step 1 E5, Step 2 E20
attachment · 1
EVEN FEED FOOT WITH QUILTING GUIDE
200-310-002
200-310-002
compatible two-hop OEM matrix
Why this fits
Two cited hops: this machine is in Janome Accessory Compatibility Category · Janome Category G, and the OEM matrix lists this part for that group. Region global_en. Applies to accessory only.
Inspect complete evidence path · 2 unique proof passages: Step 1 E5, Step 2 E7
OEM compatibility programs
Documented group memberships
Group codes are namespaced to the issuing OEM program and apply only to the cited domains. They are not machine series and do not prove compatibility outside those domains.
Janome Category G
Janome Accessory Compatibility Category · code G
Applies to: accessory, presser foot
View machine-to-group evidence · 1 unique proof passage: Proof E5
Official source library
Documents used on this page
Open the exact OEM PDF page or captured HTML edition when a safe destination exists; otherwise SewGraph labels the OEM support-page fallback honestly.
Evidence library
20 exact proof passages from 2 OEM documents
Every passage below says exactly what visible fact it proves. Repeated references to the same locator are counted once; identity evidence never counts as compatibility evidence.
Open exact proof passages · 20 unique proof passages
Official OEM PDF
What this passage proves
- Identity — printed machine name: 423S
423S/
- Document
- Janome Global Sewing Machine Accessories Catalog
- Issuer
- Janome
- Extraction
- native
- PDF page
- 6
- Open source
Advanced technical receipt
- Asset SHA-256
- 9580c0b4e4a53a2f13d71036bac9e214c316107ec4b06bf6fabe21982b17687e
- Locator
- 9cbd552ae5a794412150aba2cf768a3183a213995e2d3f4d2c06ce7837b315d1
- Destination status
- direct_pdf
Official OEM PDF
What this passage proves
- Identity — model code: 423S
- Identity — preferred display name: 423S
423S/
- Document
- Janome Global Sewing Machine Accessories Catalog
- Issuer
- Janome
- Extraction
- native
- PDF page
- 6
- Open source
Advanced technical receipt
- Asset SHA-256
- 9580c0b4e4a53a2f13d71036bac9e214c316107ec4b06bf6fabe21982b17687e
- Locator
- fbbd31908ea33ef51dae0a3ff5bebe6b5c10b9535fe6ef47e6d16c5ce66fbfc6
- Destination status
- direct_pdf
Official OEM PDF
What this passage proves
- Identity — printed machine name: 423S
423S 725S HD2200 Stitch options 22 18 20 24 24 25 22 Buttonhole
- Document
- Janome Standard Mechanical Models Comparison Chart
- Issuer
- Janome UK
- Extraction
- native
- PDF page
- 1
- Open source
Advanced technical receipt
- Asset SHA-256
- f3fe04d59ac76f98b036d7db72960ee53167f8e8e1712f314d66ca136ffeb789
- Locator
- bc1b060d8358a14aa2f00da5872b9ae2f46f8c1da1af5f0db9bbd856c38c4862
- Destination status
- direct_pdf
Official OEM PDF
What this passage proves
- bobbin fact — hook type: Oscillating hook
- presser foot fact — maximum stitch width mm: 5
- presser foot fact — presser foot shank height: Low
- presser foot fact — integrated dual feed system: No
- bobbin fact — bobbin loading style: Front loading
423S/
- Document
- Janome Global Sewing Machine Accessories Catalog
- Issuer
- Janome
- Extraction
- native
- PDF page
- 6
- Open source
Advanced technical receipt
- Asset SHA-256
- 9580c0b4e4a53a2f13d71036bac9e214c316107ec4b06bf6fabe21982b17687e
- Locator
- 8a8826fd6501434636c34b4373fad541a87dc8245f94464840a24436c6f7466b
- Destination status
- direct_pdf
Official OEM PDF
What this passage proves
- OEM program membership — Janome Accessory Compatibility Category: Janome Category G
- Item fitment path — this machine's OEM group membership for 3-WAY CORDING FOOT
- Item fitment path — this machine's OEM group membership for EVEN FEED FOOT WITH QUILTING GUIDE
- Item fitment path — this machine's OEM group membership for ZIPPER FOOT
- Item fitment path — this machine's OEM group membership for CONCEAL ‰ ZIPPER FOOT
- Item fitment path — this machine's OEM group membership for TRICOT FOOT
- Item fitment path — this machine's OEM group membership for SLIDING BUTTONHOLE FOOT
- Item fitment path — this machine's OEM group membership for GATHERING FOOT
- Item fitment path — this machine's OEM group membership for HEMMER FOOT
- Item fitment path — this machine's OEM group membership for 1/4 INCH SEAM FOOT
- Item fitment path — this machine's OEM group membership for BUTTON SEWING FOOT
- Item fitment path — this machine's OEM group membership for OVERCASTING FOOT / OVEREDGE FOOT
- Item fitment path — this machine's OEM group membership for BLIND HEM FOOT
423S/
- Document
- Janome Global Sewing Machine Accessories Catalog
- Issuer
- Janome
- Extraction
- native
- PDF page
- 6
- Open source
Advanced technical receipt
- Asset SHA-256
- 9580c0b4e4a53a2f13d71036bac9e214c316107ec4b06bf6fabe21982b17687e
- Locator
- 3d5a79a8bc763535d98260e54a5a00c8581717ab4466d932e9bd5c03294b9bb4
- Destination status
- direct_pdf
Official OEM PDF
What this passage proves
- Item fitment — presser foot: 3-WAY CORDING FOOT (compatible)
200-126-009 G
- Document
- Janome Global Sewing Machine Accessories Catalog
- Issuer
- Janome
- Extraction
- native
- PDF page
- 26
- Open source
Advanced technical receipt
- Asset SHA-256
- 9580c0b4e4a53a2f13d71036bac9e214c316107ec4b06bf6fabe21982b17687e
- Locator
- c9e5f2d5c3bba130e679a064ffe9078a1f01300547678c868ee56a11bfb57348
- Destination status
- direct_pdf
Official OEM PDF
What this passage proves
- Item fitment — attachment: EVEN FEED FOOT WITH QUILTING GUIDE (compatible)
200-310-002 G
- Document
- Janome Global Sewing Machine Accessories Catalog
- Issuer
- Janome
- Extraction
- native
- PDF page
- 30
- Open source
Advanced technical receipt
- Asset SHA-256
- 9580c0b4e4a53a2f13d71036bac9e214c316107ec4b06bf6fabe21982b17687e
- Locator
- d17b45fdcc7019192db4b89cea3b4202d6f76496aa474bdc05ac3abbddc65b67
- Destination status
- direct_pdf
Official OEM PDF
What this passage proves
- Item fitment — presser foot: ZIPPER FOOT (compatible)
940-290-000 G
- Document
- Janome Global Sewing Machine Accessories Catalog
- Issuer
- Janome
- Extraction
- native
- PDF page
- 22
- Open source
Advanced technical receipt
- Asset SHA-256
- 9580c0b4e4a53a2f13d71036bac9e214c316107ec4b06bf6fabe21982b17687e
- Locator
- 331e2b9e9a240bff71ecb5b3fff23c2e798b5742a1c1d04b095fd72338fa5f03
- Destination status
- direct_pdf
Official OEM PDF
What this passage proves
- Item fitment — presser foot: CONCEAL ‰ ZIPPER FOOT (compatible)
941-800-000 G
- Document
- Janome Global Sewing Machine Accessories Catalog
- Issuer
- Janome
- Extraction
- native
- PDF page
- 22
- Open source
Advanced technical receipt
- Asset SHA-256
- 9580c0b4e4a53a2f13d71036bac9e214c316107ec4b06bf6fabe21982b17687e
- Locator
- 4b4e62097a546285470adf0b01a5dcf9aafd40b2a4a83395bea7b0f57a7bb1a8
- Destination status
- direct_pdf
Official OEM PDF
What this passage proves
- Item fitment — presser foot: TRICOT FOOT (compatible)
202-509-006 G
- Document
- Janome Global Sewing Machine Accessories Catalog
- Issuer
- Janome
- Extraction
- native
- PDF page
- 21
- Open source
Advanced technical receipt
- Asset SHA-256
- 9580c0b4e4a53a2f13d71036bac9e214c316107ec4b06bf6fabe21982b17687e
- Locator
- 5d9cda01d5e990e7ff488d55df3a086ac8fa2c9cde653d2bca945f867b0f783d
- Destination status
- direct_pdf
Official OEM PDF
What this passage proves
- Item fitment — presser foot: SLIDING BUTTONHOLE FOOT (compatible)
200-134-000 G
- Document
- Janome Global Sewing Machine Accessories Catalog
- Issuer
- Janome
- Extraction
- native
- PDF page
- 27
- Open source
Advanced technical receipt
- Asset SHA-256
- 9580c0b4e4a53a2f13d71036bac9e214c316107ec4b06bf6fabe21982b17687e
- Locator
- dbbc116dacc717bd21dabbf64ba44555858671b0a784720ec04913f32556f672
- Destination status
- direct_pdf
Official OEM PDF
What this passage proves
- Item fitment — presser foot: GATHERING FOOT (compatible)
200-124-007 G
- Document
- Janome Global Sewing Machine Accessories Catalog
- Issuer
- Janome
- Extraction
- native
- PDF page
- 19
- Open source
Advanced technical receipt
- Asset SHA-256
- 9580c0b4e4a53a2f13d71036bac9e214c316107ec4b06bf6fabe21982b17687e
- Locator
- 34c83fde34558977cd220a5e664bb3d3ea704dd45b2ec3abb587327777a0c2b7
- Destination status
- direct_pdf
Official OEM PDF
What this passage proves
- Item fitment — presser foot: HEMMER FOOT (compatible)
202-477-004 G
- Document
- Janome Global Sewing Machine Accessories Catalog
- Issuer
- Janome
- Extraction
- native
- PDF page
- 22
- Open source
Advanced technical receipt
- Asset SHA-256
- 9580c0b4e4a53a2f13d71036bac9e214c316107ec4b06bf6fabe21982b17687e
- Locator
- 2b172d46eef245e2a8d141fdfe21b117e08f87f1fb492ffeff342409bf6f45e7
- Destination status
- direct_pdf
Official OEM PDF
What this passage proves
- Item fitment — presser foot: 1/4 INCH SEAM FOOT (compatible)
200-330-008 G
- Document
- Janome Global Sewing Machine Accessories Catalog
- Issuer
- Janome
- Extraction
- native
- PDF page
- 28
- Open source
Advanced technical receipt
- Asset SHA-256
- 9580c0b4e4a53a2f13d71036bac9e214c316107ec4b06bf6fabe21982b17687e
- Locator
- 9c95a039d1dae7e6200e853b90a87b46f2c220fec993ffc656239def6e994650
- Destination status
- direct_pdf
Official OEM PDF
What this passage proves
- Item fitment — presser foot: BUTTON SEWING FOOT (compatible)
200-131-007 G
- Document
- Janome Global Sewing Machine Accessories Catalog
- Issuer
- Janome
- Extraction
- native
- PDF page
- 27
- Open source
Advanced technical receipt
- Asset SHA-256
- 9580c0b4e4a53a2f13d71036bac9e214c316107ec4b06bf6fabe21982b17687e
- Locator
- 82421f8a92bd370941d6be49dc9830aa6b0116b9f1428cef25737a533d0bbce7
- Destination status
- direct_pdf
Official OEM PDF
What this passage proves
- Item fitment — presser foot: OVERCASTING FOOT / OVEREDGE FOOT (compatible)
200-132-008 G G
- Document
- Janome Global Sewing Machine Accessories Catalog
- Issuer
- Janome
- Extraction
- native
- PDF page
- 21
- Open source
Advanced technical receipt
- Asset SHA-256
- 9580c0b4e4a53a2f13d71036bac9e214c316107ec4b06bf6fabe21982b17687e
- Locator
- 7c9cf9520feb96a4f149588803d770658d34dc43297f7f29f41a78e86c46d773
- Destination status
- direct_pdf
Official OEM PDF
What this passage proves
- Item fitment — presser foot: BLIND HEM FOOT (compatible)
200-130-006 G
- Document
- Janome Global Sewing Machine Accessories Catalog
- Issuer
- Janome
- Extraction
- native
- PDF page
- 21
- Open source
Advanced technical receipt
- Asset SHA-256
- 9580c0b4e4a53a2f13d71036bac9e214c316107ec4b06bf6fabe21982b17687e
- Locator
- 0fb44cd2d8471ce2ad7bb16391e5d62d798f022f7b4491fb8fb7876ac37f2c90
- Destination status
- direct_pdf
Official OEM PDF
What this passage proves
- Item fitment — presser foot: SLIDING BUTTONHOLE FOOT (compatible)
200-123-006 G
- Document
- Janome Global Sewing Machine Accessories Catalog
- Issuer
- Janome
- Extraction
- native
- PDF page
- 27
- Open source
Advanced technical receipt
- Asset SHA-256
- 9580c0b4e4a53a2f13d71036bac9e214c316107ec4b06bf6fabe21982b17687e
- Locator
- 21b6e472da230e0f8be70fb3a07071d75303eb3cef84e922e2449e40c993ffd8
- Destination status
- direct_pdf
Official OEM PDF
What this passage proves
- Item fitment — presser foot: CONCEAL ‰ ZIPPER FOOT (compatible)
202-475-002 G
- Document
- Janome Global Sewing Machine Accessories Catalog
- Issuer
- Janome
- Extraction
- native
- PDF page
- 22
- Open source
Advanced technical receipt
- Asset SHA-256
- 9580c0b4e4a53a2f13d71036bac9e214c316107ec4b06bf6fabe21982b17687e
- Locator
- e9534ec7e8027bb8b8ead66cc0c0c9b68b522d9b18c9ecb2115aeb844cf5a975
- Destination status
- direct_pdf
Official OEM PDF
What this passage proves
- Item fitment — presser foot: HEMMER FOOT (compatible)
202-044-008 G
- Document
- Janome Global Sewing Machine Accessories Catalog
- Issuer
- Janome
- Extraction
- native
- PDF page
- 22
- Open source
Advanced technical receipt
- Asset SHA-256
- 9580c0b4e4a53a2f13d71036bac9e214c316107ec4b06bf6fabe21982b17687e
- Locator
- d601e07830d036c7ae2b52952187981d61af29113570bd3940d02e76e10e3b82
- Destination status
- direct_pdf
What is supported, and what remains open?
3 supported answers and 6 answers with conditions or remaining limits. Evidence coverage is not a probability of accuracy.
Unresolved owner questions (3)
- System or interchangeability: Not established — Not yet verified: The reviewed instructions do not establish bobbin class, system, part numbers, dimensions, material, loading taxonomy or substitution.
- System: Not established — Not yet verified: No named needle-system designation is established by the reviewed pages.
- Standardized fit: Not established — Not yet verified: The pin-and-groove procedure does not establish shank height, a universal snap-on system, adapter requirements or third-party foot fitment.
Advanced provenance and dataset receipt
Public snapshot a1cc1aceef228fcf33329e37165ab888ce5b9fe3f13eb56967ae0fbf41d8d8a7
Catalog e156281c7d3048027b5ac89e7476be8f54dd5a9309505e96260b0455d3cd2a7e · exact native quotes only · dossier method sewgraph-model-dossier-v2