Included inventory
supported
The accessory list supplies five bobbins, part 100376-051.
Source evidence · 1 unique proof passage: Profile Proof E1
Baby Lock · verified physical machine
Jane
Cited model code BL500A
View cited identity evidence · 1 unique proof passage
Jump to: Proof E4
Identity verified · evidence for each owner answer
Identity verified · evidence for each answer
Using and maintaining this machine
Check the conditions alongside each answer. Foot attachment, shank type and adapter requirements are separate; one does not establish universal accessory fit.
Bobbins and hook
Needles and threading
Included set
supported
The supplied ORGAN HLX5 needle case, X80805-151, lists one size 9, two size 11, one size 14, one size 16 and one ballpoint needle.
Source evidence · 1 unique proof passage: Profile Proof E1
Oem designation
supported
The manual recommends HLX5 needles.
Source evidence · 1 unique proof passage: Profile Proof E2
Conditional alternative
conditional
Schmetz 130/705H needles may also be used.
- Only under normal sewing conditions, as the manual qualifies the alternative.
Source evidence · 1 unique proof passage: Profile Proof E2
Presser feet and adapters
Included general purpose
supported
General Purpose Foot XA1425-001 is listed among the supplied accessories.
Source evidence · 1 unique proof passage: Profile Proof E1
Sources for the owner answers above
Official OEM PDF
What this passage supports
- Included inventory: The accessory list supplies five bobbins, part 100376-051.
- Included set: The supplied ORGAN HLX5 needle case, X80805-151, lists one size 9, two size 11, one size 14, one size 16 and one ballpoint needle.
- Included general purpose: General Purpose Foot XA1425-001 is listed among the supplied accessories.
Accessories 10 Bobbin (5) 100376-051 9 General Purpose Foot XA1425-001 (ORGAN HLX5) 1 Size 9 2 Size 11 1 Size 14 1 Size 16 1 Ballpoint Needle X80805-151
- Document
- BL500A instruction manual
- Issuer
- Baby Lock
- Extraction
- Native document text
- PDF page
- 7
- Open source
Advanced technical receipt
- Asset SHA-256
- 3cc4b238f669af3989107f73386d55c6e26dab0fc9b5e2bd0633f4bd14728efe
- Locator
- 1cb2b938e749d148075001673e648f0e30d1680a26e9fae238c0e4827b2a39b2
- Destination status
- landing_page_fallback
Official OEM PDF
What this passage supports
- Oem designation: The manual recommends HLX5 needles.
- Conditional alternative: Schmetz 130/705H needles may also be used.
HLX5 needles are recommended; however, Schmetz 130/705H needles may also be used under normal sewing conditions.
- Document
- BL500A instruction manual
- Issuer
- Baby Lock
- Extraction
- Native document text
- PDF page
- 18
- Open source
Advanced technical receipt
- Asset SHA-256
- 3cc4b238f669af3989107f73386d55c6e26dab0fc9b5e2bd0633f4bd14728efe
- Locator
- 7481397be6e82d143dd176789bc0d1018dfdd0dea56f85dc037359c247e2944f
- Destination status
- landing_page_fallback
Machine facets and OEM groups
Cited machine facets
Identity and compatibility badges
Identity families, physical traits, and OEM accessory groups stay separate. A group badge applies only to its named program and domains.
OEM roster group · compatibility use under reviewBaby Lock Accessory Group: Baby Lock Group I
Temporary compatibility containment
Group-derived compatibility review in progress
Compatibility under review: this OEM Group I roster membership is preserved, but SewGraph has temporarily withheld group-derived part claims because required master-shank conditions were lost in the earlier projection. Independently cited exact-model parts remain available.
Verified identity facts, cited machine traits, and independently cited exact-model relationships remain available. The held OEM roster group is shown as evidence only and currently asserts no public compatibility domain.
Review issue #56 · reviewed 2026-08-26 · recheck due 2026-09-02
Detailed specifications, compatible parts, and source library
Evidence coverage
Core answers and cited items
Machine category: Not yet established
Core domains answered: None yet
Domains with cited compatible items: bobbin (1), presser foot (2)
Unknown is not incompatible. A missing answer means the current official evidence does not support one yet.
Parts & accessories
3 documented relationships
A two-hop result joins the machine’s official accessory-group membership to the OEM part matrix. Open the evidence to inspect both hops.
3 relationships shown
bobbin · 1
Metal Bobbins - Type L
BMP-BOB
BMP-BOB
compatible direct OEM claim
Why this fits
The OEM source directly names this machine or exact scope for this part.
Inspect complete evidence path · 1 unique proof passage: Proof E5
presser foot · 2
Master Shank
BLQP-MB
BLQP-MB
compatible direct OEM claim
Why this fits
The OEM source directly names this machine or exact scope for this part.
Inspect complete evidence path · 1 unique proof passage: Proof E6
1/4" Ruler Foot
BLQP-RF
BLQP-RF
compatible direct OEM claim
Why this fits
The OEM source directly names this machine or exact scope for this part.
Inspect complete evidence path · 1 unique proof passage: Proof E7
OEM compatibility programs
Documented group memberships
Group codes are namespaced to the issuing OEM program and apply only to the cited domains. They are not machine series and do not prove compatibility outside those domains.
Baby Lock Group I
Baby Lock Accessory Group · code I
Applies to: Domain not yet classified
Conditions: Group I membership is cited; part-level master-shank conditions remain under review.
View machine-to-group evidence · 1 unique proof passage: Proof E4
Official source library
Documents used on this page
Open the exact OEM PDF page or captured HTML edition when a safe destination exists; otherwise SewGraph labels the OEM support-page fallback honestly.
Baby Lock 2025 accessory brochure
accessory compatibility
Open official source destination · 1 unique proof passage: Proof E1
Evidence library
7 exact proof passages from 1 OEM document
Every passage below says exactly what visible fact it proves. Repeated references to the same locator are counted once; identity evidence never counts as compatibility evidence.
Open exact proof passages · 7 unique proof passages
Official OEM PDF
What this passage proves
- Identity — preferred display name: Jane
- Identity — marketing name: Jane
- Identity — model code: BL500A
Jane (BL500A)
- Document
- Baby Lock 2025 accessory brochure
- Issuer
- Baby Lock
- Extraction
- native
- PDF page
- 3
- Open source
Advanced technical receipt
- Asset SHA-256
- 558d3860e61aced8ff65613a0faa552289094dda731a8b1e02f6daeb674bdb0e
- Locator
- a4c61efd42a9ed99ce1fde49fa76fcc0517bda02e67a56ab9792e1a80bd756b4
- Destination status
- direct_pdf
Official OEM PDF
What this passage proves
- Identity — marketing name: Jane
Jane (BL500A) I/H
- Document
- Baby Lock 2025 accessory brochure
- Issuer
- Baby Lock
- Extraction
- native
- PDF page
- 3
- Open source
Advanced technical receipt
- Asset SHA-256
- 558d3860e61aced8ff65613a0faa552289094dda731a8b1e02f6daeb674bdb0e
- Locator
- b1222d9ac3d4b486cc907f54b93709ecdefbaa958e2cd71f70b775aee4a80b25
- Destination status
- direct_pdf
Official OEM PDF
What this passage proves
- Identity — printed machine name: BL500A
machine (BL530B, BL520B, BL500A, BLQP).
- Document
- Baby Lock 2025 accessory brochure
- Issuer
- Baby Lock
- Extraction
- native
- PDF page
- 15
- Open source
Advanced technical receipt
- Asset SHA-256
- 558d3860e61aced8ff65613a0faa552289094dda731a8b1e02f6daeb674bdb0e
- Locator
- 313850edf11189606617691e444b87145c39d7bf4e1fe98fb3b96d00e617e8f8
- Destination status
- direct_pdf
Official OEM PDF
What this passage proves
- OEM program membership — Baby Lock Accessory Group: Baby Lock Group I
Jane (BL500A) I/H
- Document
- Baby Lock 2025 accessory brochure
- Issuer
- Baby Lock
- Extraction
- native
- PDF page
- 3
- Open source
Advanced technical receipt
- Asset SHA-256
- 558d3860e61aced8ff65613a0faa552289094dda731a8b1e02f6daeb674bdb0e
- Locator
- b461e4179e324e7b8e0c01072e5466317e0b261e61a136ebe29a24752677b169
- Destination status
- direct_pdf
Official OEM PDF
What this passage proves
- Item fitment — bobbin: Metal Bobbins - Type L (compatible)
Metal Bobbins - Type L (BMP-BOB) Fits Models BL500A, BL510A, BL520B, BL530B, BLQP, BMP6, BMP8, BMP9, BMV10, BNT10, BNT10L, BND9, BND9-2, EMP6
- Document
- Baby Lock 2025 accessory brochure
- Issuer
- Baby Lock
- Extraction
- native
- PDF page
- 86
- Open source
Advanced technical receipt
- Asset SHA-256
- 558d3860e61aced8ff65613a0faa552289094dda731a8b1e02f6daeb674bdb0e
- Locator
- 13031542f0272a7ee31353788b6fad674e366037ebee99387499c306f9bf5b66
- Destination status
- direct_pdf
Official OEM PDF
What this passage proves
- Item fitment — presser foot: Master Shank (compatible)
Master Shank (BLQP-MB) Fits Group I Open a world of new techniques using this innovative ankle with your machine (BL530B, BL520B, BL500A, BLQP). The master shank allows you to attach and use a wider variety of optional snap on feet.
- Document
- Baby Lock 2025 accessory brochure
- Issuer
- Baby Lock
- Extraction
- native
- PDF page
- 15
- Open source
Advanced technical receipt
- Asset SHA-256
- 558d3860e61aced8ff65613a0faa552289094dda731a8b1e02f6daeb674bdb0e
- Locator
- 58f5d674b04c172f013fe1b0934ca9b2780c3764fa071ad12758cc0ef44b2a33
- Destination status
- direct_pdf
Official OEM PDF
What this passage proves
- Item fitment — presser foot: 1/4" Ruler Foot (compatible)
1/4" Ruler Foot (BLQP-RF) Fits Models BL500A, BLQP, BL520B, BL530B
- Document
- Baby Lock 2025 accessory brochure
- Issuer
- Baby Lock
- Extraction
- native
- PDF page
- 21
- Open source
Advanced technical receipt
- Asset SHA-256
- 558d3860e61aced8ff65613a0faa552289094dda731a8b1e02f6daeb674bdb0e
- Locator
- eb9ce7dd6df49e9902c7d49f4d661b29d06dd17e6898044790eb08bb7a453b1d
- Destination status
- direct_pdf
What is supported, and what remains open?
4 supported answers and 1 answers with conditions or remaining limits. Evidence coverage is not a probability of accuracy.
Unresolved owner questions (3)
- System: Not established — Not yet verified: Included inventory does not establish standardized class, dimensions, material, hook type or general substitution.
- Other interchangeability: Not established — Not yet verified: No needle interchangeability beyond the named conditional alternative is established.
- Standardized fit: Not established — Not yet verified: Included inventory establishes no universal mount, shank dimensions, third-party fit or unlisted accessory compatibility.
Advanced provenance and dataset receipt
Public snapshot a1cc1aceef228fcf33329e37165ab888ce5b9fe3f13eb56967ae0fbf41d8d8a7
Catalog e156281c7d3048027b5ac89e7476be8f54dd5a9309505e96260b0455d3cd2a7e · exact native quotes only · dossier method sewgraph-model-dossier-v2