SewGraph

Baby Lock · verified physical machine

Zest

Cited model code BL15B

View cited identity evidence · 1 unique proof passage

Jump to: Proof E8

Identity verified · evidence for each owner answer

Identity verified · evidence for each answer

Using and maintaining this machine

Check the conditions alongside each answer. Foot attachment, shank type and adapter requirements are separate; one does not establish universal accessory fit.

Bobbins and hook

Included bobbins

conditional

The standard accessories include three bobbins.

  • Included quantity only; bobbin class, material and other-model interchangeability remain unknown.

Source evidence · 1 unique proof passage: Profile Proof E1

Case removal and replacement

conditional

Open the hook cover, raise the needle and remove the bobbin case by its latch; when reinserting the case, seat its horn in the hook-race recess.

  • Exact BL15B own-case procedure, not a replacement-case fit claim.

Source evidence · 1 unique proof passage: Profile Proof E2

Case thread path

conditional

Draw bobbin thread into the case slot, under the tension spring and through the delivery eye, leaving about 10 cm (4 inches) free.

  • Use the manual's own bobbin case and diagram; no universal unwind direction asserted.

Source evidence · 1 unique proof passage: Profile Proof E3

Needles and threading

Included set

conditional

The standard accessory needle set is labeled HAx1.

  • Included needle-set label only; exclusive system and third-party fit remain unknown.

Source evidence · 1 unique proof passage: Profile Proof E1

Safe replacement

conditional

Turn power off, raise the needle, insert a straight new needle fully with its flat side toward the rear and firmly tighten the clamp screw; do not use bent or blunt needles.

  • Exact BL15B replacement procedure and breakage caution.

Source evidence · 1 unique proof passage: Profile Proof E4

Presser feet and adapters

Own foot change

conditional

With power off, raise the needle and foot, press the holder's rear lever to remove the foot, align the replacement foot pin below the holder groove and lower the holder to lock it.

  • Own-foot attachment procedure only; no other-brand or standardized fit implied.

Source evidence · 1 unique proof passage: Profile Proof E5

Holder screw

conditional

With power off, align the holder hole with the presser-bar hole, insert the thumb setscrew and tighten it clockwise with a screwdriver.

  • Own-holder mounting procedure; no adapter or shank-standard claim.

Source evidence · 1 unique proof passage: Profile Proof E6

Sources for the owner answers above
Official OEM PDF

What this passage supports

  • Included bobbins: The standard accessories include three bobbins.
  • Included set: The standard accessory needle set is labeled HAx1.
Bobbin (3) Needle set (HAx1)
Document
Baby Lock Zest BL15B Instruction Manual
Issuer
Baby Lock
Extraction
Native document text
PDF page
10
Open source
Open cited PDF at page 10Open OEM source or support page
Advanced technical receipt
Asset SHA-256
edc2b77ee11a6b5e3aea2666f568c96ed242984e81a1003aabd8d264829d3b72
Locator
6b5186c71c3c0ad6fa19e333ac4218cf3718855a6d6be1e443e17bec3d276a37
Destination status
direct_pdf
Official OEM PDF

What this passage supports

  • Safe replacement: Turn power off, raise the needle, insert a straight new needle fully with its flat side toward the rear and firmly tighten the clamp screw; do not use bent or blunt needles.
Turn OFF the power switch before changing the needle. Raise the needle to its highest position Insert a new needle into the needle clamp with the flat side to the rear. push it up as far as it will go. Tighten the needle clamp screw firmly Never use a bent or blunt needle.
Document
Baby Lock Zest BL15B Instruction Manual
Issuer
Baby Lock
Extraction
Native document text
PDF page
16
Open source
Open cited PDF at page 16Open OEM source or support page
Advanced technical receipt
Asset SHA-256
edc2b77ee11a6b5e3aea2666f568c96ed242984e81a1003aabd8d264829d3b72
Locator
abbb0cd69bdf220e12ff5ac0c3439667599de4913c21bf95c77e4ced4e75f812
Destination status
direct_pdf
Official OEM PDF

What this passage supports

  • Case removal and replacement: Open the hook cover, raise the needle and remove the bobbin case by its latch; when reinserting the case, seat its horn in the hook-race recess.
Removing or Inserting the Bobbin Case Open the hook cover. Raise the needle by turning the handwheel toward you. Take out the bobbin case by holding the latch. When inserting the bobbin case, place the horn into the recess of the hook race.
Document
Baby Lock Zest BL15B Instruction Manual
Issuer
Baby Lock
Extraction
Native document text
PDF page
20
Open source
Open cited PDF at page 20Open OEM source or support page
Advanced technical receipt
Asset SHA-256
edc2b77ee11a6b5e3aea2666f568c96ed242984e81a1003aabd8d264829d3b72
Locator
c3cf9225c32d625832b550686757eaa6e8099d26fb841974fb17dbb328444ae7
Destination status
direct_pdf
Official OEM PDF

What this passage supports

  • Own foot change: With power off, raise the needle and foot, press the holder's rear lever to remove the foot, align the replacement foot pin below the holder groove and lower the holder to lock it.
Turn OFF the power switch before changing the foot. Turn the handwheel toward you to raise the needle bar to its highest position. Raise the presser foot. Press the lever Place the presser foot so that the pin Lower the foot holder to lock the foot in place.
Document
Baby Lock Zest BL15B Instruction Manual
Issuer
Baby Lock
Extraction
Native document text
PDF page
14
Open source
Open cited PDF at page 14Open OEM source or support page
Advanced technical receipt
Asset SHA-256
edc2b77ee11a6b5e3aea2666f568c96ed242984e81a1003aabd8d264829d3b72
Locator
d0301f16906afe11a4b37ba50cbab6b7bba9101ea8a2fa71329d9c42c0deb8fa
Destination status
direct_pdf
Official OEM PDF

What this passage supports

  • Holder screw: With power off, align the holder hole with the presser-bar hole, insert the thumb setscrew and tighten it clockwise with a screwdriver.
Turn OFF the power switch before detaching or attaching foot holder. Match the hole in the foot holder Fit the thumb screw Tighten the screw by turning it clockwise with screwdriver.
Document
Baby Lock Zest BL15B Instruction Manual
Issuer
Baby Lock
Extraction
Native document text
PDF page
14
Open source
Open cited PDF at page 14Open OEM source or support page
Advanced technical receipt
Asset SHA-256
edc2b77ee11a6b5e3aea2666f568c96ed242984e81a1003aabd8d264829d3b72
Locator
ea0ea0db2552f5adbb809365e62ab12399fe9c1ae9aad7b037138cb0dd266a50
Destination status
direct_pdf
Official OEM PDF

What this passage supports

  • Case thread path: Draw bobbin thread into the case slot, under the tension spring and through the delivery eye, leaving about 10 cm (4 inches) free.
Threading Bobbin Case Place the bobbin into the bobbin case. Pull the thread into the bobbin case slot. Draw the thread under the tension spring and into the delivery eye. Leave about 10 cm (4˝) of free thread.
Document
Baby Lock Zest BL15B Instruction Manual
Issuer
Baby Lock
Extraction
Native document text
PDF page
22
Open source
Open cited PDF at page 22Open OEM source or support page
Advanced technical receipt
Asset SHA-256
edc2b77ee11a6b5e3aea2666f568c96ed242984e81a1003aabd8d264829d3b72
Locator
ead03170f74fee1c31c4ad9180d18e640679fa2059fb1c46cbb77a05f59cb413
Destination status
direct_pdf
Machine facets and OEM groups

Cited machine facets

Identity and compatibility badges

Identity families, physical traits, and OEM accessory groups stay separate. A group badge applies only to its named program and domains.

OEM group · accessory, presser footBaby Lock Accessory Group: Baby Lock Accessory Group HOEM group · accessory, presser footBaby Lock Accessory Group: Baby Lock Group H
Detailed specifications, compatible parts, and source library

Evidence coverage

Core answers and cited items

Machine category: Not yet established

Core domains answered: None yet

Domains with cited compatible items: presser foot (45)

Unknown is not incompatible. A missing answer means the current official evidence does not support one yet.

Specifications

Documented machine facts

Multiple cited representations for one field share one row. SewGraph preserves every value and exact proof passage; it does not guess which representation is “raw” or “normalized” when the public projection does not label that distinction.

bobbin

bobbin typefront_loading

View exact evidence · 1 unique proof passage: Proof E4

Parts & accessories

45 documented relationships

A two-hop result joins the machine’s official accessory-group membership to the OEM part matrix. Open the evidence to inspect both hops.

45 relationships shown

presser foot · 45

Button Sewing Foot
BL-BS
compatible two-hop OEM matrix
Why this fits

Two cited hops: this machine is in Baby Lock Accessory Group · Baby Lock Group H, and the OEM matrix lists this part for that group. Edition 2025. Region us_en. Applies to presser foot only.

Inspect complete evidence path · 2 unique proof passages: Step 1 E6, Step 2 E7

View proof JSONReport this claim
Ruler Foot - Low Shank
BL-LOTRF
compatible two-hop OEM matrix
Why this fits

Two cited hops: this machine is in Baby Lock Accessory Group · Baby Lock Group H, and the OEM matrix lists this part for that group. Edition 2025. Region us_en. Applies to presser foot only.

Inspect complete evidence path · 2 unique proof passages: Step 1 E6, Step 2 E8

View proof JSONReport this claim
1/4" Quilting Foot
BL37-QF
compatible two-hop OEM matrix
Why this fits

Two cited hops: this machine is in Baby Lock Accessory Group · Baby Lock Group H, and the OEM matrix lists this part for that group. Edition 2025. Region us_en. Applies to presser foot only.

Inspect complete evidence path · 2 unique proof passages: Step 1 E6, Step 2 E9

View proof JSONReport this claim
Blind Hem Foot
BL66-BLH
compatible two-hop OEM matrix
Why this fits

Two cited hops: this machine is in Baby Lock Accessory Group · Baby Lock Group H, and the OEM matrix lists this part for that group. Edition 2025. Region us_en. Applies to presser foot only.

Inspect complete evidence path · 2 unique proof passages: Step 1 E6, Step 2 E10

View proof JSONReport this claim
Overcasting Foot
BL66-OF
compatible two-hop OEM matrix
Why this fits

Two cited hops: this machine is in Baby Lock Accessory Group · Baby Lock Group H, and the OEM matrix lists this part for that group. Edition 2025. Region us_en. Applies to presser foot only.

Inspect complete evidence path · 2 unique proof passages: Step 1 E6, Step 2 E11

View proof JSONReport this claim
Open Toe Foot
BL66-OT
compatible two-hop OEM matrix
Why this fits

Two cited hops: this machine is in Baby Lock Accessory Group · Baby Lock Group H, and the OEM matrix lists this part for that group. Edition 2025. Region us_en. Applies to presser foot only.

Inspect complete evidence path · 2 unique proof passages: Step 1 E6, Step 2 E12

View proof JSONReport this claim
Applique Foot
BLA-AF
compatible two-hop OEM matrix
Why this fits

Two cited hops: this machine is in Baby Lock Accessory Group · Baby Lock Group H, and the OEM matrix lists this part for that group. Edition 2025. Region us_en. Applies to presser foot only.

Inspect complete evidence path · 2 unique proof passages: Step 1 E6, Step 2 E13

View proof JSONReport this claim
Hemmer Foot 4mm
BLA-HF4
compatible two-hop OEM matrix
Why this fits

Two cited hops: this machine is in Baby Lock Accessory Group · Baby Lock Group H, and the OEM matrix lists this part for that group. Edition 2025. Region us_en. Applies to presser foot only.

Inspect complete evidence path · 2 unique proof passages: Step 1 E6, Step 2 E14

View proof JSONReport this claim
Walking Foot with 2 Guides - Low Shank
BLDW-L2
compatible two-hop OEM matrix
Why this fits

Two cited hops: this machine is in Baby Lock Accessory Group · Baby Lock Group H, and the OEM matrix lists this part for that group. Edition 2025. Region us_en. Applies to presser foot only.

Inspect complete evidence path · 2 unique proof passages: Step 1 E6, Step 2 E15

View proof JSONReport this claim
Border Guide Foot
BLDY-BGF
compatible two-hop OEM matrix
Why this fits

Two cited hops: this machine is in Baby Lock Accessory Group · Baby Lock Group H, and the OEM matrix lists this part for that group. Edition 2025. Region us_en. Applies to presser foot only.

Inspect complete evidence path · 2 unique proof passages: Step 1 E6, Step 2 E16

View proof JSONReport this claim
Zipper Foot - Teflon
BLDY-TZF
compatible two-hop OEM matrix
Why this fits

Two cited hops: this machine is in Baby Lock Accessory Group · Baby Lock Group H, and the OEM matrix lists this part for that group. Edition 2025. Region us_en. Applies to presser foot only.

Inspect complete evidence path · 2 unique proof passages: Step 1 E6, Step 2 E17

View proof JSONReport this claim
Cording Foot - 3-Cord
BLG-CF3
compatible two-hop OEM matrix
Why this fits

Two cited hops: this machine is in Baby Lock Accessory Group · Baby Lock Group H, and the OEM matrix lists this part for that group. Edition 2025. Region us_en. Applies to presser foot only.

Inspect complete evidence path · 2 unique proof passages: Step 1 E6, Step 2 E18

View proof JSONReport this claim
Stitch Guide Foot
BLG-SGF
compatible two-hop OEM matrix
Why this fits

Two cited hops: this machine is in Baby Lock Accessory Group · Baby Lock Group H, and the OEM matrix lists this part for that group. Edition 2025. Region us_en. Applies to presser foot only.

Inspect complete evidence path · 2 unique proof passages: Step 1 E6, Step 2 E19

View proof JSONReport this claim
Zipper Foot
BLG-WZF
compatible two-hop OEM matrix
Why this fits

Two cited hops: this machine is in Baby Lock Accessory Group · Baby Lock Group H, and the OEM matrix lists this part for that group. Edition 2025. Region us_en. Applies to presser foot only.

Inspect complete evidence path · 2 unique proof passages: Step 1 E6, Step 2 E20

View proof JSONReport this claim
General Purpose Zigzag Foot
BLG-ZZ
compatible two-hop OEM matrix
Why this fits

Two cited hops: this machine is in Baby Lock Accessory Group · Baby Lock Group H, and the OEM matrix lists this part for that group. Edition 2025. Region us_en. Applies to presser foot only.

Inspect complete evidence path · 2 unique proof passages: Step 1 E6, Step 2 E21

View proof JSONReport this claim
Monogramming N+ Foot
BLSA-MF
compatible two-hop OEM matrix
Why this fits

Two cited hops: this machine is in Baby Lock Accessory Group · Baby Lock Group H, and the OEM matrix lists this part for that group. Edition 2025. Region us_en. Applies to presser foot only.

Inspect complete evidence path · 2 unique proof passages: Step 1 E6, Step 2 E22

View proof JSONReport this claim
Quilt Binding Foot
BLSA-QBF
compatible two-hop OEM matrix
Why this fits

Two cited hops: this machine is in Baby Lock Accessory Group · Baby Lock Group H, and the OEM matrix lists this part for that group. Edition 2025. Region us_en. Applies to presser foot only.

Inspect complete evidence path · 2 unique proof passages: Step 1 E6, Step 2 E23

View proof JSONReport this claim
5/8" Adjustable Seam Guide Foot
BLSA-SGF
compatible two-hop OEM matrix
Why this fits

Two cited hops: this machine is in Baby Lock Accessory Group · Baby Lock Group H, and the OEM matrix lists this part for that group. Edition 2025. Region us_en. Applies to presser foot only.

Inspect complete evidence path · 2 unique proof passages: Step 1 E6, Step 2 E24

View proof JSONReport this claim
Dynamic Walking Foot with Standard
BLSA-WF
compatible two-hop OEM matrix
Why this fits

Two cited hops: this machine is in Baby Lock Accessory Group · Baby Lock Group H, and the OEM matrix lists this part for that group. Edition 2025. Region us_en. Applies to presser foot only.

Inspect complete evidence path · 2 unique proof passages: Step 1 E6, Step 2 E25

View proof JSONReport this claim
Bi-Level Foot - Left
BLSO-BLF
compatible two-hop OEM matrix
Why this fits

Two cited hops: this machine is in Baby Lock Accessory Group · Baby Lock Group H, and the OEM matrix lists this part for that group. Edition 2025. Region us_en. Applies to presser foot only.

Inspect complete evidence path · 2 unique proof passages: Step 1 E6, Step 2 E26

View proof JSONReport this claim
Bi-Level Foot - Right
BLSO-BRF
compatible two-hop OEM matrix
Why this fits

Two cited hops: this machine is in Baby Lock Accessory Group · Baby Lock Group H, and the OEM matrix lists this part for that group. Edition 2025. Region us_en. Applies to presser foot only.

Inspect complete evidence path · 2 unique proof passages: Step 1 E6, Step 2 E27

View proof JSONReport this claim
Double Cording Foot 4-6mm
BLSO-DCF6
compatible two-hop OEM matrix
Why this fits

Two cited hops: this machine is in Baby Lock Accessory Group · Baby Lock Group H, and the OEM matrix lists this part for that group. Edition 2025. Region us_en. Applies to presser foot only.

Inspect complete evidence path · 2 unique proof passages: Step 1 E6, Step 2 E28

View proof JSONReport this claim
Double Cording Foot 7-8mm
BLSO-DCF8
compatible two-hop OEM matrix
Why this fits

Two cited hops: this machine is in Baby Lock Accessory Group · Baby Lock Group H, and the OEM matrix lists this part for that group. Edition 2025. Region us_en. Applies to presser foot only.

Inspect complete evidence path · 2 unique proof passages: Step 1 E6, Step 2 E29

View proof JSONReport this claim
Quilting Leather Roller Foot
BLSO-LRF
compatible two-hop OEM matrix
Why this fits

Two cited hops: this machine is in Baby Lock Accessory Group · Baby Lock Group H, and the OEM matrix lists this part for that group. Edition 2025. Region us_en. Applies to presser foot only.

Inspect complete evidence path · 2 unique proof passages: Step 1 E6, Step 2 E30

View proof JSONReport this claim
Pintuck Foot
BLSO-PK
compatible two-hop OEM matrix
Why this fits

Two cited hops: this machine is in Baby Lock Accessory Group · Baby Lock Group H, and the OEM matrix lists this part for that group. Edition 2025. Region us_en. Applies to presser foot only.

Inspect complete evidence path · 2 unique proof passages: Step 1 E6, Step 2 E31

View proof JSONReport this claim
Roller Foot - Metal
BLSO-RF
compatible two-hop OEM matrix
Why this fits

Two cited hops: this machine is in Baby Lock Accessory Group · Baby Lock Group H, and the OEM matrix lists this part for that group. Edition 2025. Region us_en. Applies to presser foot only.

Inspect complete evidence path · 2 unique proof passages: Step 1 E6, Step 2 E32

View proof JSONReport this claim
Open Toe Foot
BLSY-OT
compatible two-hop OEM matrix
Why this fits

Two cited hops: this machine is in Baby Lock Accessory Group · Baby Lock Group H, and the OEM matrix lists this part for that group. Edition 2025. Region us_en. Applies to presser foot only.

Inspect complete evidence path · 2 unique proof passages: Step 1 E6, Step 2 E33

View proof JSONReport this claim
Bias Binder Foot - Adjustable
ESG-ABB
compatible two-hop OEM matrix
Why this fits

Two cited hops: this machine is in Baby Lock Accessory Group · Baby Lock Group H, and the OEM matrix lists this part for that group. Edition 2025. Region us_en. Applies to presser foot only.

Inspect complete evidence path · 2 unique proof passages: Step 1 E6, Step 2 E34

View proof JSONReport this claim
Bias Binder Foot
ESG-BB
compatible two-hop OEM matrix
Why this fits

Two cited hops: this machine is in Baby Lock Accessory Group · Baby Lock Group H, and the OEM matrix lists this part for that group. Edition 2025. Region us_en. Applies to presser foot only.

Inspect complete evidence path · 2 unique proof passages: Step 1 E6, Step 2 E35

View proof JSONReport this claim
Braiding Foot - Adjustable
ESG-BF
compatible two-hop OEM matrix
Why this fits

Two cited hops: this machine is in Baby Lock Accessory Group · Baby Lock Group H, and the OEM matrix lists this part for that group. Edition 2025. Region us_en. Applies to presser foot only.

Inspect complete evidence path · 2 unique proof passages: Step 1 E6, Step 2 E36

View proof JSONReport this claim
Cording Foot - 3-Cord
ESG-CF3
compatible two-hop OEM matrix
Why this fits

Two cited hops: this machine is in Baby Lock Accessory Group · Baby Lock Group H, and the OEM matrix lists this part for that group. Edition 2025. Region us_en. Applies to presser foot only.

Inspect complete evidence path · 2 unique proof passages: Step 1 E6, Step 2 E37

View proof JSONReport this claim
Cording Foot - 5-Cord
ESG-CF5
compatible two-hop OEM matrix
Why this fits

Two cited hops: this machine is in Baby Lock Accessory Group · Baby Lock Group H, and the OEM matrix lists this part for that group. Edition 2025. Region us_en. Applies to presser foot only.

Inspect complete evidence path · 2 unique proof passages: Step 1 E6, Step 2 E38

View proof JSONReport this claim
Edge Joining Foot
ESG-EJF
compatible two-hop OEM matrix
Why this fits

Two cited hops: this machine is in Baby Lock Accessory Group · Baby Lock Group H, and the OEM matrix lists this part for that group. Edition 2025. Region us_en. Applies to presser foot only.

Inspect complete evidence path · 2 unique proof passages: Step 1 E6, Step 2 E39

View proof JSONReport this claim
Felling Foot
ESG-FF
compatible two-hop OEM matrix
Why this fits

Two cited hops: this machine is in Baby Lock Accessory Group · Baby Lock Group H, and the OEM matrix lists this part for that group. Edition 2025. Region us_en. Applies to presser foot only.

Inspect complete evidence path · 2 unique proof passages: Step 1 E6, Step 2 E40

View proof JSONReport this claim
Hemmer Foot
ESG-HF
compatible two-hop OEM matrix
Why this fits

Two cited hops: this machine is in Baby Lock Accessory Group · Baby Lock Group H, and the OEM matrix lists this part for that group. Edition 2025. Region us_en. Applies to presser foot only.

Inspect complete evidence path · 2 unique proof passages: Step 1 E6, Step 2 E41

View proof JSONReport this claim
Zipper Foot - Invisible
ESG-IZF
compatible two-hop OEM matrix
Why this fits

Two cited hops: this machine is in Baby Lock Accessory Group · Baby Lock Group H, and the OEM matrix lists this part for that group. Edition 2025. Region us_en. Applies to presser foot only.

Inspect complete evidence path · 2 unique proof passages: Step 1 E6, Step 2 E42

View proof JSONReport this claim
Fringe/Looping Foot
ESG-LF
compatible two-hop OEM matrix
Why this fits

Two cited hops: this machine is in Baby Lock Accessory Group · Baby Lock Group H, and the OEM matrix lists this part for that group. Edition 2025. Region us_en. Applies to presser foot only.

Inspect complete evidence path · 2 unique proof passages: Step 1 E6, Step 2 E43

View proof JSONReport this claim
Open Toe Foot
ESG-OT
compatible two-hop OEM matrix
Why this fits

Two cited hops: this machine is in Baby Lock Accessory Group · Baby Lock Group H, and the OEM matrix lists this part for that group. Edition 2025. Region us_en. Applies to presser foot only.

Inspect complete evidence path · 2 unique proof passages: Step 1 E6, Step 2 E44

View proof JSONReport this claim
Pintuck Foot
ESG-PF
compatible two-hop OEM matrix
Why this fits

Two cited hops: this machine is in Baby Lock Accessory Group · Baby Lock Group H, and the OEM matrix lists this part for that group. Edition 2025. Region us_en. Applies to presser foot only.

Inspect complete evidence path · 2 unique proof passages: Step 1 E6, Step 2 E45

View proof JSONReport this claim
Pearl and Piping Foot
ESG-PP
compatible two-hop OEM matrix
Why this fits

Two cited hops: this machine is in Baby Lock Accessory Group · Baby Lock Group H, and the OEM matrix lists this part for that group. Edition 2025. Region us_en. Applies to presser foot only.

Inspect complete evidence path · 2 unique proof passages: Step 1 E6, Step 2 E46

View proof JSONReport this claim
1/4" Quilting Foot
ESG-QF
compatible two-hop OEM matrix
Why this fits

Two cited hops: this machine is in Baby Lock Accessory Group · Baby Lock Group H, and the OEM matrix lists this part for that group. Edition 2025. Region us_en. Applies to presser foot only.

Inspect complete evidence path · 2 unique proof passages: Step 1 E6, Step 2 E47

View proof JSONReport this claim
1/4" Quilting Foot with Guide
ESG-QGF
compatible two-hop OEM matrix
Why this fits

Two cited hops: this machine is in Baby Lock Accessory Group · Baby Lock Group H, and the OEM matrix lists this part for that group. Edition 2025. Region us_en. Applies to presser foot only.

Inspect complete evidence path · 2 unique proof passages: Step 1 E6, Step 2 E48

View proof JSONReport this claim
Roller Foot
ESG-RF
compatible two-hop OEM matrix
Why this fits

Two cited hops: this machine is in Baby Lock Accessory Group · Baby Lock Group H, and the OEM matrix lists this part for that group. Edition 2025. Region us_en. Applies to presser foot only.

Inspect complete evidence path · 2 unique proof passages: Step 1 E6, Step 2 E49

View proof JSONReport this claim
Straight Stitch Foot
ESG-SSL
compatible two-hop OEM matrix
Why this fits

Two cited hops: this machine is in Baby Lock Accessory Group · Baby Lock Group H, and the OEM matrix lists this part for that group. Edition 2025. Region us_en. Applies to presser foot only.

Inspect complete evidence path · 2 unique proof passages: Step 1 E6, Step 2 E50

View proof JSONReport this claim
Teflon Coated Foot
ESG-TF
compatible two-hop OEM matrix
Why this fits

Two cited hops: this machine is in Baby Lock Accessory Group · Baby Lock Group H, and the OEM matrix lists this part for that group. Edition 2025. Region us_en. Applies to presser foot only.

Inspect complete evidence path · 2 unique proof passages: Step 1 E6, Step 2 E51

View proof JSONReport this claim

OEM compatibility programs

Documented group memberships

Group codes are namespaced to the issuing OEM program and apply only to the cited domains. They are not machine series and do not prove compatibility outside those domains.

Baby Lock Accessory Group H

Baby Lock Accessory Group · code H

Applies to: accessory, presser foot

View machine-to-group evidence · 1 unique proof passage: Proof E5

View proof JSONReport this claim

Baby Lock Group H

Baby Lock Accessory Group · code H

Applies to: accessory, presser foot

View machine-to-group evidence · 1 unique proof passage: Proof E6

View proof JSONReport this claim

Official source library

Documents used on this page

Open the exact OEM PDF page or captured HTML edition when a safe destination exists; otherwise SewGraph labels the OEM support-page fallback honestly.

Baby Lock 2025 accessory brochure

accessory compatibility

Open official source destination · 1 unique proof passage: Proof E1

Baby Lock Zest BL15B specification sheet

specification

Open official source destination · 1 unique proof passage: Proof E4

Evidence library

51 exact proof passages from 2 OEM documents

Every passage below says exactly what visible fact it proves. Repeated references to the same locator are counted once; identity evidence never counts as compatibility evidence.

Open exact proof passages · 51 unique proof passages
Official OEM PDF

What this passage proves

  • Identity — preferred display name: Zest
  • Identity — marketing name: Zest
  • Identity — model code: BL15B
Zest (BL15B)
Document
Baby Lock 2025 accessory brochure
Issuer
Baby Lock
Extraction
native
PDF page
3
Open source
Open cited PDF at page 3Open OEM source or support page
Advanced technical receipt
Asset SHA-256
558d3860e61aced8ff65613a0faa552289094dda731a8b1e02f6daeb674bdb0e
Locator
c00c1659952e84827b60a2526c9fa59852aa3283f98917c79fbd2e13196fa279
Destination status
direct_pdf
Official OEM PDF

What this passage proves

  • Identity — marketing name: Zest
Zest (BL15B)   H/L
Document
Baby Lock 2025 accessory brochure
Issuer
Baby Lock
Extraction
native
PDF page
3
Open source
Open cited PDF at page 3Open OEM source or support page
Advanced technical receipt
Asset SHA-256
558d3860e61aced8ff65613a0faa552289094dda731a8b1e02f6daeb674bdb0e
Locator
325621be3f6b0493e577bbddfb8c21642ecdbffdcd1b6bb3ba5409a745ab3d1b
Destination status
direct_pdf
Official OEM PDF

What this passage proves

  • Identity — printed machine name: BL15B
Fits Group A, B and Models BL15B, BL35B, BL25B This clear-view foot offers excellent visibility while free-motion quilting,
Document
Baby Lock 2025 accessory brochure
Issuer
Baby Lock
Extraction
native
PDF page
12
Open source
Open cited PDF at page 12Open OEM source or support page
Advanced technical receipt
Asset SHA-256
558d3860e61aced8ff65613a0faa552289094dda731a8b1e02f6daeb674bdb0e
Locator
688657af9e62c4ada00ebfcb3e79890ed4aa0a76d2a458abe91fb9d14d6f2b4c
Destination status
direct_pdf
Official OEM PDF

What this passage proves

  • bobbin fact — bobbin type: front_loading
Front-loading bobbin
Document
Baby Lock Zest BL15B specification sheet
Issuer
Baby Lock
Extraction
native
PDF page
7
Open source
Open cited PDF at page 7Open OEM source or support page
Advanced technical receipt
Asset SHA-256
49cdfcf8fcc1f47b8942aded641dfde34132f48c3ec74108754fcc125d81cc06
Locator
96fcdc6aec5f9aed20bfb7e42e4433a99a36adbddaacb17d34425c9d4a7677e7
Destination status
direct_pdf
Official OEM PDF

What this passage proves

  • OEM program membership — Baby Lock Accessory Group: Baby Lock Accessory Group H
Zest (BL15B)   H/L
Document
Baby Lock 2025 accessory brochure
Issuer
Baby Lock
Extraction
native
PDF page
3
Open source
Open cited PDF at page 3Open OEM source or support page
Advanced technical receipt
Asset SHA-256
558d3860e61aced8ff65613a0faa552289094dda731a8b1e02f6daeb674bdb0e
Locator
15b1f82fb3bdfa2757ee9caac268c33893736f754beb3b65cf21e5b4032ad2aa
Destination status
direct_pdf
Official OEM PDF

What this passage proves

  • OEM program membership — Baby Lock Accessory Group: Baby Lock Group H
  • Item fitment path — this machine's OEM group membership for Button Sewing Foot
  • Item fitment path — this machine's OEM group membership for Ruler Foot - Low Shank
  • Item fitment path — this machine's OEM group membership for 1/4" Quilting Foot
  • Item fitment path — this machine's OEM group membership for Blind Hem Foot
  • Item fitment path — this machine's OEM group membership for Overcasting Foot
  • Item fitment path — this machine's OEM group membership for Open Toe Foot
  • Item fitment path — this machine's OEM group membership for Applique Foot
  • Item fitment path — this machine's OEM group membership for Hemmer Foot 4mm
  • Item fitment path — this machine's OEM group membership for Walking Foot with 2 Guides - Low Shank
  • Item fitment path — this machine's OEM group membership for Border Guide Foot
  • Item fitment path — this machine's OEM group membership for Zipper Foot - Teflon
  • Item fitment path — this machine's OEM group membership for Cording Foot - 3-Cord
  • Item fitment path — this machine's OEM group membership for Stitch Guide Foot
  • Item fitment path — this machine's OEM group membership for Zipper Foot
  • Item fitment path — this machine's OEM group membership for General Purpose Zigzag Foot
  • Item fitment path — this machine's OEM group membership for Monogramming N+ Foot
  • Item fitment path — this machine's OEM group membership for Quilt Binding Foot
  • Item fitment path — this machine's OEM group membership for 5/8" Adjustable Seam Guide Foot
  • Item fitment path — this machine's OEM group membership for Dynamic Walking Foot with Standard
  • Item fitment path — this machine's OEM group membership for Bi-Level Foot - Left
  • Item fitment path — this machine's OEM group membership for Bi-Level Foot - Right
  • Item fitment path — this machine's OEM group membership for Double Cording Foot 4-6mm
  • Item fitment path — this machine's OEM group membership for Double Cording Foot 7-8mm
  • Item fitment path — this machine's OEM group membership for Quilting Leather Roller Foot
  • Item fitment path — this machine's OEM group membership for Pintuck Foot
  • Item fitment path — this machine's OEM group membership for Roller Foot - Metal
  • Item fitment path — this machine's OEM group membership for Bias Binder Foot - Adjustable
  • Item fitment path — this machine's OEM group membership for Bias Binder Foot
  • Item fitment path — this machine's OEM group membership for Braiding Foot - Adjustable
  • Item fitment path — this machine's OEM group membership for Cording Foot - 5-Cord
  • Item fitment path — this machine's OEM group membership for Edge Joining Foot
  • Item fitment path — this machine's OEM group membership for Felling Foot
  • Item fitment path — this machine's OEM group membership for Hemmer Foot
  • Item fitment path — this machine's OEM group membership for Zipper Foot - Invisible
  • Item fitment path — this machine's OEM group membership for Fringe/Looping Foot
  • Item fitment path — this machine's OEM group membership for Pearl and Piping Foot
  • Item fitment path — this machine's OEM group membership for 1/4" Quilting Foot with Guide
  • Item fitment path — this machine's OEM group membership for Roller Foot
  • Item fitment path — this machine's OEM group membership for Straight Stitch Foot
  • Item fitment path — this machine's OEM group membership for Teflon Coated Foot
Zest (BL15B)   H/L
Document
Baby Lock 2025 accessory brochure
Issuer
Baby Lock
Extraction
native
PDF page
3
Open source
Open cited PDF at page 3Open OEM source or support page
Advanced technical receipt
Asset SHA-256
558d3860e61aced8ff65613a0faa552289094dda731a8b1e02f6daeb674bdb0e
Locator
aa7caafa1e69955ceedadb3812e20c24eb3dececa19e4fea88efa7b47819e3dc
Destination status
direct_pdf
Official OEM PDF

What this passage proves

  • Item fitment — presser foot: Button Sewing Foot (compatible)
(BL-BS) Fits Group H
Document
Baby Lock 2025 accessory brochure
Issuer
Baby Lock
Extraction
native
PDF page
7
Open source
Open cited PDF at page 7Open OEM source or support page
Advanced technical receipt
Asset SHA-256
558d3860e61aced8ff65613a0faa552289094dda731a8b1e02f6daeb674bdb0e
Locator
27dd142dec72980c6b83423d69f1b15019beb4e4082a3788ba72862cf6a06f13
Destination status
direct_pdf
Official OEM PDF

What this passage proves

  • Item fitment — presser foot: Ruler Foot - Low Shank (compatible)
(BL-LOTRF) Fits Groups A, B, D, G, H
Document
Baby Lock 2025 accessory brochure
Issuer
Baby Lock
Extraction
native
PDF page
21
Open source
Open cited PDF at page 21Open OEM source or support page
Advanced technical receipt
Asset SHA-256
558d3860e61aced8ff65613a0faa552289094dda731a8b1e02f6daeb674bdb0e
Locator
9d3cdc5176ad5536fc3b465eaacb50a49023ab4a584f85503068909cd90e7dc4
Destination status
direct_pdf
Official OEM PDF

What this passage proves

  • Item fitment — presser foot: 1/4" Quilting Foot (compatible)
(BL37-QF) Fits Groups A, B, D, G, H
Document
Baby Lock 2025 accessory brochure
Issuer
Baby Lock
Extraction
native
PDF page
18
Open source
Open cited PDF at page 18Open OEM source or support page
Advanced technical receipt
Asset SHA-256
558d3860e61aced8ff65613a0faa552289094dda731a8b1e02f6daeb674bdb0e
Locator
556d90083d710faf7e5aefa32e153e95011c83bfb06f6899395792e81bf31d44
Destination status
direct_pdf
Official OEM PDF

What this passage proves

  • Item fitment — presser foot: Blind Hem Foot (compatible)
(BL66-BLH) Fits Groups A, B, D, G, H
Document
Baby Lock 2025 accessory brochure
Issuer
Baby Lock
Extraction
native
PDF page
5
Open source
Open cited PDF at page 5Open OEM source or support page
Advanced technical receipt
Asset SHA-256
558d3860e61aced8ff65613a0faa552289094dda731a8b1e02f6daeb674bdb0e
Locator
eae2007917af10d06738e7972e6631ed62821e507f65b65e4263be3bdf0a2beb
Destination status
direct_pdf
Official OEM PDF

What this passage proves

  • Item fitment — presser foot: Overcasting Foot (compatible)
(BL66-OF) Fits Groups A, B, D, G, H
Document
Baby Lock 2025 accessory brochure
Issuer
Baby Lock
Extraction
native
PDF page
16
Open source
Open cited PDF at page 16Open OEM source or support page
Advanced technical receipt
Asset SHA-256
558d3860e61aced8ff65613a0faa552289094dda731a8b1e02f6daeb674bdb0e
Locator
5f40ae0af2830b3cf0cb0f887c855ef4c60481daba6f0bd60aaf703688931916
Destination status
direct_pdf
Official OEM PDF

What this passage proves

  • Item fitment — presser foot: Open Toe Foot (compatible)
(BL66-OT) Fits Groups A, B, D, G, H
Document
Baby Lock 2025 accessory brochure
Issuer
Baby Lock
Extraction
native
PDF page
16
Open source
Open cited PDF at page 16Open OEM source or support page
Advanced technical receipt
Asset SHA-256
558d3860e61aced8ff65613a0faa552289094dda731a8b1e02f6daeb674bdb0e
Locator
71d989cd003afa17aaa5f0a9050571a4c10e1c973bdf23290cee9eaf40209c9b
Destination status
direct_pdf
Official OEM PDF

What this passage proves

  • Item fitment — presser foot: Applique Foot (compatible)
(BLA-AF) Fits Models: Groups A, B, D, G, H
Document
Baby Lock 2025 accessory brochure
Issuer
Baby Lock
Extraction
native
PDF page
4
Open source
Open cited PDF at page 4Open OEM source or support page
Advanced technical receipt
Asset SHA-256
558d3860e61aced8ff65613a0faa552289094dda731a8b1e02f6daeb674bdb0e
Locator
b968bd208297e5115f42a4b90227b0e7d6a86071b2a80f832dcfb6f07c33d46a
Destination status
direct_pdf
Official OEM PDF

What this passage proves

  • Item fitment — presser foot: Hemmer Foot 4mm (compatible)
(BLA-HF4) Fits Models: Groups A, B, D, G, H, I
Document
Baby Lock 2025 accessory brochure
Issuer
Baby Lock
Extraction
native
PDF page
15
Open source
Open cited PDF at page 15Open OEM source or support page
Advanced technical receipt
Asset SHA-256
558d3860e61aced8ff65613a0faa552289094dda731a8b1e02f6daeb674bdb0e
Locator
5e61d414e0f6c1d23d506d73e9ba5918a0e43460284636756740456399fba472
Destination status
direct_pdf
Official OEM PDF

What this passage proves

  • Item fitment — presser foot: Walking Foot with 2 Guides - Low Shank (compatible)
(BLDW-L2) Fits Groups B, D, G, H
Document
Baby Lock 2025 accessory brochure
Issuer
Baby Lock
Extraction
native
PDF page
24
Open source
Open cited PDF at page 24Open OEM source or support page
Advanced technical receipt
Asset SHA-256
558d3860e61aced8ff65613a0faa552289094dda731a8b1e02f6daeb674bdb0e
Locator
1556e7c2a06964790e8d4101b5aac02bfd7e5604161e891ddc86b82ff083a9fe
Destination status
direct_pdf
Official OEM PDF

What this passage proves

  • Item fitment — presser foot: Border Guide Foot (compatible)
(BLDY-BGF) Fits Groups A, B, D, G, H
Document
Baby Lock 2025 accessory brochure
Issuer
Baby Lock
Extraction
native
PDF page
6
Open source
Open cited PDF at page 6Open OEM source or support page
Advanced technical receipt
Asset SHA-256
558d3860e61aced8ff65613a0faa552289094dda731a8b1e02f6daeb674bdb0e
Locator
8939973519e63908acf6b958c88e2aa289bbadf7b650cf2e3e3ddfcf7299ee93
Destination status
direct_pdf
Official OEM PDF

What this passage proves

  • Item fitment — presser foot: Zipper Foot - Teflon (compatible)
(BLDY-TZF) Fits Groups A, B, D, G, H, I
Document
Baby Lock 2025 accessory brochure
Issuer
Baby Lock
Extraction
native
PDF page
26
Open source
Open cited PDF at page 26Open OEM source or support page
Advanced technical receipt
Asset SHA-256
558d3860e61aced8ff65613a0faa552289094dda731a8b1e02f6daeb674bdb0e
Locator
9b8d2634c898cda40bd4b756da0890a18fba899a24bf4567fda6f58bdb19db6b
Destination status
direct_pdf
Official OEM PDF

What this passage proves

  • Item fitment — presser foot: Cording Foot - 3-Cord (compatible)
(BLG-CF3) Fits Groups A, B, D, G, H
Document
Baby Lock 2025 accessory brochure
Issuer
Baby Lock
Extraction
native
PDF page
9
Open source
Open cited PDF at page 9Open OEM source or support page
Advanced technical receipt
Asset SHA-256
558d3860e61aced8ff65613a0faa552289094dda731a8b1e02f6daeb674bdb0e
Locator
99349f1d3cc3da8e3f874fd76160c03730e7a17bf13ed24ac2faf1e74040bc77
Destination status
direct_pdf
Official OEM PDF

What this passage proves

  • Item fitment — presser foot: Stitch Guide Foot (compatible)
(BLG-SGF) Fits Groups A, B, D, G, H
Document
Baby Lock 2025 accessory brochure
Issuer
Baby Lock
Extraction
native
PDF page
22
Open source
Open cited PDF at page 22Open OEM source or support page
Advanced technical receipt
Asset SHA-256
558d3860e61aced8ff65613a0faa552289094dda731a8b1e02f6daeb674bdb0e
Locator
92c851ada8b115952bc41a64fcd5af31739637b58e7821eaa4dae662a4ffb7fc
Destination status
direct_pdf
Official OEM PDF

What this passage proves

  • Item fitment — presser foot: Zipper Foot (compatible)
(BLG-WZF) Fits Groups A, B, D, G, H, I
Document
Baby Lock 2025 accessory brochure
Issuer
Baby Lock
Extraction
native
PDF page
25
Open source
Open cited PDF at page 25Open OEM source or support page
Advanced technical receipt
Asset SHA-256
558d3860e61aced8ff65613a0faa552289094dda731a8b1e02f6daeb674bdb0e
Locator
3efdcd64ba0aab82f0537b016ef61d8e0c73b128c6495220f2185621ccf561f0
Destination status
direct_pdf
Official OEM PDF

What this passage proves

  • Item fitment — presser foot: General Purpose Zigzag Foot (compatible)
(BLG-ZZ) Fits Groups A, B, D, G, H
Document
Baby Lock 2025 accessory brochure
Issuer
Baby Lock
Extraction
native
PDF page
14
Open source
Open cited PDF at page 14Open OEM source or support page
Advanced technical receipt
Asset SHA-256
558d3860e61aced8ff65613a0faa552289094dda731a8b1e02f6daeb674bdb0e
Locator
d1f2dc642d4a0e15ea2c9e7434d23f45efbc9ee34ae71e007786253798d7dfe2
Destination status
direct_pdf
Official OEM PDF

What this passage proves

  • Item fitment — presser foot: Monogramming N+ Foot (compatible)
(BLSA-MF) Fits Group A, B, D, G, H
Document
Baby Lock 2025 accessory brochure
Issuer
Baby Lock
Extraction
native
PDF page
15
Open source
Open cited PDF at page 15Open OEM source or support page
Advanced technical receipt
Asset SHA-256
558d3860e61aced8ff65613a0faa552289094dda731a8b1e02f6daeb674bdb0e
Locator
15f46da0237d17300dd7e461828b1bd03cf57e2916b2fa1b11a9eefa9bf04f8c
Destination status
direct_pdf
Official OEM PDF

What this passage proves

  • Item fitment — presser foot: Quilt Binding Foot (compatible)
(BLSA-QBF) Fits Groups A, B, D, G, H
Document
Baby Lock 2025 accessory brochure
Issuer
Baby Lock
Extraction
native
PDF page
19
Open source
Open cited PDF at page 19Open OEM source or support page
Advanced technical receipt
Asset SHA-256
558d3860e61aced8ff65613a0faa552289094dda731a8b1e02f6daeb674bdb0e
Locator
706545b8737034c067738f5c51affbf3257b154dc5f4c0f6b694d369a11a14bc
Destination status
direct_pdf
Official OEM PDF

What this passage proves

  • Item fitment — presser foot: 5/8" Adjustable Seam Guide Foot (compatible)
(BLSA-SGF) Fits Groups A, B, D, G, H
Document
Baby Lock 2025 accessory brochure
Issuer
Baby Lock
Extraction
native
PDF page
11
Open source
Open cited PDF at page 11Open OEM source or support page
Advanced technical receipt
Asset SHA-256
558d3860e61aced8ff65613a0faa552289094dda731a8b1e02f6daeb674bdb0e
Locator
ec02073baec7f937945cab79fc17561903ab2685fe184d1469357374a1a44f02
Destination status
direct_pdf
Official OEM PDF

What this passage proves

  • Item fitment — presser foot: Dynamic Walking Foot with Standard (compatible)
(BLSA-WF) and Open Toe Sole Fits Groups A, B, D, G, H
Document
Baby Lock 2025 accessory brochure
Issuer
Baby Lock
Extraction
native
PDF page
24
Open source
Open cited PDF at page 24Open OEM source or support page
Advanced technical receipt
Asset SHA-256
558d3860e61aced8ff65613a0faa552289094dda731a8b1e02f6daeb674bdb0e
Locator
b6aa7791af48e5cbe18c245f1e0d82f2e4f4e7c3712f641eebe57fde41789e6d
Destination status
direct_pdf
Official OEM PDF

What this passage proves

  • Item fitment — presser foot: Bi-Level Foot - Left (compatible)
(BLSO-BLF) Fits Groups A, B, D, G, H
Document
Baby Lock 2025 accessory brochure
Issuer
Baby Lock
Extraction
native
PDF page
5
Open source
Open cited PDF at page 5Open OEM source or support page
Advanced technical receipt
Asset SHA-256
558d3860e61aced8ff65613a0faa552289094dda731a8b1e02f6daeb674bdb0e
Locator
7b22dd77093ba092736eb8ec1c4572adac62547a96ec20408240d68dbcb3b2d5
Destination status
direct_pdf
Official OEM PDF

What this passage proves

  • Item fitment — presser foot: Bi-Level Foot - Right (compatible)
(BLSO-BRF) Fits Groups A, B, D, G, H
Document
Baby Lock 2025 accessory brochure
Issuer
Baby Lock
Extraction
native
PDF page
5
Open source
Open cited PDF at page 5Open OEM source or support page
Advanced technical receipt
Asset SHA-256
558d3860e61aced8ff65613a0faa552289094dda731a8b1e02f6daeb674bdb0e
Locator
5b9a5e0fce07b555261a7a7c0cbe2ca30e50a32149278c8a5cf0a30845659798
Destination status
direct_pdf
Official OEM PDF

What this passage proves

  • Item fitment — presser foot: Double Cording Foot 4-6mm (compatible)
(BLSO-DCF6) Fits Groups A, B, D, G, H
Document
Baby Lock 2025 accessory brochure
Issuer
Baby Lock
Extraction
native
PDF page
10
Open source
Open cited PDF at page 10Open OEM source or support page
Advanced technical receipt
Asset SHA-256
558d3860e61aced8ff65613a0faa552289094dda731a8b1e02f6daeb674bdb0e
Locator
6dfded6bcb65638ae6a586cb7bfbf9775b56054e1a9f3bd3568f96bb3cfddce3
Destination status
direct_pdf
Official OEM PDF

What this passage proves

  • Item fitment — presser foot: Double Cording Foot 7-8mm (compatible)
(BLSO-DCF8) Fits Groups A, B, D, G, H
Document
Baby Lock 2025 accessory brochure
Issuer
Baby Lock
Extraction
native
PDF page
10
Open source
Open cited PDF at page 10Open OEM source or support page
Advanced technical receipt
Asset SHA-256
558d3860e61aced8ff65613a0faa552289094dda731a8b1e02f6daeb674bdb0e
Locator
890feceb0835d3be9624f869097823bf71fc60093654f7780aeb7769ee493fd5
Destination status
direct_pdf
Official OEM PDF

What this passage proves

  • Item fitment — presser foot: Quilting Leather Roller Foot (compatible)
(BLSO-LRF) Fits Groups A, B, D, G, H
Document
Baby Lock 2025 accessory brochure
Issuer
Baby Lock
Extraction
native
PDF page
20
Open source
Open cited PDF at page 20Open OEM source or support page
Advanced technical receipt
Asset SHA-256
558d3860e61aced8ff65613a0faa552289094dda731a8b1e02f6daeb674bdb0e
Locator
432e5946ce1918763dec5f70e1511530f5cdd119068ffd5673e6211749bbdd4f
Destination status
direct_pdf
Official OEM PDF

What this passage proves

  • Item fitment — presser foot: Pintuck Foot (compatible)
(BLSO-PK) Fits Groups A, B, D, G, H
Document
Baby Lock 2025 accessory brochure
Issuer
Baby Lock
Extraction
native
PDF page
17
Open source
Open cited PDF at page 17Open OEM source or support page
Advanced technical receipt
Asset SHA-256
558d3860e61aced8ff65613a0faa552289094dda731a8b1e02f6daeb674bdb0e
Locator
7cc09fb7d4503da9519d5e19bf652cec4b3abf1b47073507aa129fbbe1753f5a
Destination status
direct_pdf
Official OEM PDF

What this passage proves

  • Item fitment — presser foot: Roller Foot - Metal (compatible)
(BLSO-RF) Fits Groups A, B, D, G, H
Document
Baby Lock 2025 accessory brochure
Issuer
Baby Lock
Extraction
native
PDF page
20
Open source
Open cited PDF at page 20Open OEM source or support page
Advanced technical receipt
Asset SHA-256
558d3860e61aced8ff65613a0faa552289094dda731a8b1e02f6daeb674bdb0e
Locator
09d805b4d1b1192efcd1f65b5d6a0acffd05cde072f27740f273ff205d4809a6
Destination status
direct_pdf
Official OEM PDF

What this passage proves

  • Item fitment — presser foot: Open Toe Foot (compatible)
(BLSY-OT) Fits Groups A, B, D, G, H
Document
Baby Lock 2025 accessory brochure
Issuer
Baby Lock
Extraction
native
PDF page
16
Open source
Open cited PDF at page 16Open OEM source or support page
Advanced technical receipt
Asset SHA-256
558d3860e61aced8ff65613a0faa552289094dda731a8b1e02f6daeb674bdb0e
Locator
d14d8e9581fa33335d48fec6e54f4724c3fe4fd061455487130889ff25f101d4
Destination status
direct_pdf
Official OEM PDF

What this passage proves

  • Item fitment — presser foot: Bias Binder Foot - Adjustable (compatible)
(ESG-ABB) Fits Groups A, B, D, G, H
Document
Baby Lock 2025 accessory brochure
Issuer
Baby Lock
Extraction
native
PDF page
4
Open source
Open cited PDF at page 4Open OEM source or support page
Advanced technical receipt
Asset SHA-256
558d3860e61aced8ff65613a0faa552289094dda731a8b1e02f6daeb674bdb0e
Locator
d37021bb621ce5af670a416dc1bd506bef8bec8c644765254da4b6251dc92c4d
Destination status
direct_pdf
Official OEM PDF

What this passage proves

  • Item fitment — presser foot: Bias Binder Foot (compatible)
(ESG-BB) Fits Groups A, B, D, G, H,
Document
Baby Lock 2025 accessory brochure
Issuer
Baby Lock
Extraction
native
PDF page
4
Open source
Open cited PDF at page 4Open OEM source or support page
Advanced technical receipt
Asset SHA-256
558d3860e61aced8ff65613a0faa552289094dda731a8b1e02f6daeb674bdb0e
Locator
8fba4dc41ae78eab9709cc75daa9a1c0973f3a5557e02fb9fc73ca8c2caec561
Destination status
direct_pdf
Official OEM PDF

What this passage proves

  • Item fitment — presser foot: Braiding Foot - Adjustable (compatible)
(ESG-BF) Fits Groups A, B, D, G, H
Document
Baby Lock 2025 accessory brochure
Issuer
Baby Lock
Extraction
native
PDF page
6
Open source
Open cited PDF at page 6Open OEM source or support page
Advanced technical receipt
Asset SHA-256
558d3860e61aced8ff65613a0faa552289094dda731a8b1e02f6daeb674bdb0e
Locator
e17e51bb97e4dd44b53b78221d15ef09807044ecea4df266e59c1e007817c701
Destination status
direct_pdf
Official OEM PDF

What this passage proves

  • Item fitment — presser foot: Cording Foot - 3-Cord (compatible)
(ESG-CF3) Fits Groups A, B, D, G, H
Document
Baby Lock 2025 accessory brochure
Issuer
Baby Lock
Extraction
native
PDF page
9
Open source
Open cited PDF at page 9Open OEM source or support page
Advanced technical receipt
Asset SHA-256
558d3860e61aced8ff65613a0faa552289094dda731a8b1e02f6daeb674bdb0e
Locator
43851cba8eac7b41e40043515e261a73cc02f3877abd1b0c0c1bbb40414a826a
Destination status
direct_pdf
Official OEM PDF

What this passage proves

  • Item fitment — presser foot: Cording Foot - 5-Cord (compatible)
(ESG-CF5) Fits Groups A, B, D, G, H
Document
Baby Lock 2025 accessory brochure
Issuer
Baby Lock
Extraction
native
PDF page
9
Open source
Open cited PDF at page 9Open OEM source or support page
Advanced technical receipt
Asset SHA-256
558d3860e61aced8ff65613a0faa552289094dda731a8b1e02f6daeb674bdb0e
Locator
7711ac6f918758ad44804fb2e7069d84f691fd66bdad1050d846fc5c579e5316
Destination status
direct_pdf
Official OEM PDF

What this passage proves

  • Item fitment — presser foot: Edge Joining Foot (compatible)
(ESG-EJF) Fits Groups A, B, D, G, H
Document
Baby Lock 2025 accessory brochure
Issuer
Baby Lock
Extraction
native
PDF page
10
Open source
Open cited PDF at page 10Open OEM source or support page
Advanced technical receipt
Asset SHA-256
558d3860e61aced8ff65613a0faa552289094dda731a8b1e02f6daeb674bdb0e
Locator
e37a947b665fa659c682401a2fe2acc9b7979dd89fd2a4f94ed27cba70447329
Destination status
direct_pdf
Official OEM PDF

What this passage proves

  • Item fitment — presser foot: Felling Foot (compatible)
(ESG-FF) Fits Groups A, B, D, G, H, J
Document
Baby Lock 2025 accessory brochure
Issuer
Baby Lock
Extraction
native
PDF page
11
Open source
Open cited PDF at page 11Open OEM source or support page
Advanced technical receipt
Asset SHA-256
558d3860e61aced8ff65613a0faa552289094dda731a8b1e02f6daeb674bdb0e
Locator
e66e3d5363ddf51180f0121b61d8f6cacd5378dbde00625473732f3d028a9fe3
Destination status
direct_pdf
Official OEM PDF

What this passage proves

  • Item fitment — presser foot: Hemmer Foot (compatible)
(ESG-HF) Fits Groups A, B, D, G, H, I
Document
Baby Lock 2025 accessory brochure
Issuer
Baby Lock
Extraction
native
PDF page
14
Open source
Open cited PDF at page 14Open OEM source or support page
Advanced technical receipt
Asset SHA-256
558d3860e61aced8ff65613a0faa552289094dda731a8b1e02f6daeb674bdb0e
Locator
9131afe308cfd6927104027197f2c55065640133e3d037442f8571cf857bba61
Destination status
direct_pdf
Official OEM PDF

What this passage proves

  • Item fitment — presser foot: Zipper Foot - Invisible (compatible)
(ESG-IZF) Fits Groups A, B, D, G, H
Document
Baby Lock 2025 accessory brochure
Issuer
Baby Lock
Extraction
native
PDF page
25
Open source
Open cited PDF at page 25Open OEM source or support page
Advanced technical receipt
Asset SHA-256
558d3860e61aced8ff65613a0faa552289094dda731a8b1e02f6daeb674bdb0e
Locator
a9b9dd3de4d20a8797cbb5df7b10a8d74e873b2a3ec8f21e3aceb480711920d2
Destination status
direct_pdf
Official OEM PDF

What this passage proves

  • Item fitment — presser foot: Fringe/Looping Foot (compatible)
(ESG-LF) Fits Groups A, B, D, G, H
Document
Baby Lock 2025 accessory brochure
Issuer
Baby Lock
Extraction
native
PDF page
13
Open source
Open cited PDF at page 13Open OEM source or support page
Advanced technical receipt
Asset SHA-256
558d3860e61aced8ff65613a0faa552289094dda731a8b1e02f6daeb674bdb0e
Locator
f1316dfa67eb5b4787443e1f5db4d67e17193fc5ebb27edf1b5f8d55bdc99335
Destination status
direct_pdf
Official OEM PDF

What this passage proves

  • Item fitment — presser foot: Open Toe Foot (compatible)
(ESG-OT) Fits Groups A, B, D, G, H
Document
Baby Lock 2025 accessory brochure
Issuer
Baby Lock
Extraction
native
PDF page
16
Open source
Open cited PDF at page 16Open OEM source or support page
Advanced technical receipt
Asset SHA-256
558d3860e61aced8ff65613a0faa552289094dda731a8b1e02f6daeb674bdb0e
Locator
b2b1b1b8ea4c9794e3b7dcb6c5d233ff2610ce15e2015fb7744dc06c0db3decc
Destination status
direct_pdf
Official OEM PDF

What this passage proves

  • Item fitment — presser foot: Pintuck Foot (compatible)
(ESG-PF) Fits Groups A, B, D, G, H
Document
Baby Lock 2025 accessory brochure
Issuer
Baby Lock
Extraction
native
PDF page
17
Open source
Open cited PDF at page 17Open OEM source or support page
Advanced technical receipt
Asset SHA-256
558d3860e61aced8ff65613a0faa552289094dda731a8b1e02f6daeb674bdb0e
Locator
3aabc738406cf051748ceece3d04f4f362623e0cdf550b79eb13ddb751f8b38a
Destination status
direct_pdf
Official OEM PDF

What this passage proves

  • Item fitment — presser foot: Pearl and Piping Foot (compatible)
(ESG-PP) Fits Groups A, B, D, G, H
Document
Baby Lock 2025 accessory brochure
Issuer
Baby Lock
Extraction
native
PDF page
17
Open source
Open cited PDF at page 17Open OEM source or support page
Advanced technical receipt
Asset SHA-256
558d3860e61aced8ff65613a0faa552289094dda731a8b1e02f6daeb674bdb0e
Locator
283a9e75b1982946d3fd3441963f56b128e3299d028e2e028b16f1929a819fab
Destination status
direct_pdf
Official OEM PDF

What this passage proves

  • Item fitment — presser foot: 1/4" Quilting Foot (compatible)
(ESG-QF) Fits Groups A, B, D, G, H
Document
Baby Lock 2025 accessory brochure
Issuer
Baby Lock
Extraction
native
PDF page
18
Open source
Open cited PDF at page 18Open OEM source or support page
Advanced technical receipt
Asset SHA-256
558d3860e61aced8ff65613a0faa552289094dda731a8b1e02f6daeb674bdb0e
Locator
9d505ba03200ffa8794cd0511d46b11800a3bd846204c85c06576072d1e14705
Destination status
direct_pdf
Official OEM PDF

What this passage proves

  • Item fitment — presser foot: 1/4" Quilting Foot with Guide (compatible)
(ESG-QGF) Fits Groups A, B, D, G, H
Document
Baby Lock 2025 accessory brochure
Issuer
Baby Lock
Extraction
native
PDF page
18
Open source
Open cited PDF at page 18Open OEM source or support page
Advanced technical receipt
Asset SHA-256
558d3860e61aced8ff65613a0faa552289094dda731a8b1e02f6daeb674bdb0e
Locator
cd64eba79a5886e9d7b8ed8e3aeffefaf1fcec516eadf26a3a9d2e80f4f15cea
Destination status
direct_pdf
Official OEM PDF

What this passage proves

  • Item fitment — presser foot: Roller Foot (compatible)
(ESG-RF) Fits Groups A, B, D, G, H, I
Document
Baby Lock 2025 accessory brochure
Issuer
Baby Lock
Extraction
native
PDF page
20
Open source
Open cited PDF at page 20Open OEM source or support page
Advanced technical receipt
Asset SHA-256
558d3860e61aced8ff65613a0faa552289094dda731a8b1e02f6daeb674bdb0e
Locator
07b1f965fb730338e682537b53121f913e3ceebae0df0e1264a5ab0b0edb5d00
Destination status
direct_pdf
Official OEM PDF

What this passage proves

  • Item fitment — presser foot: Straight Stitch Foot (compatible)
(ESG-SSL) Fits Groups A, B, D, G, H
Document
Baby Lock 2025 accessory brochure
Issuer
Baby Lock
Extraction
native
PDF page
23
Open source
Open cited PDF at page 23Open OEM source or support page
Advanced technical receipt
Asset SHA-256
558d3860e61aced8ff65613a0faa552289094dda731a8b1e02f6daeb674bdb0e
Locator
386a94fa3373fb61f830af9f4b7708a084bfe27c6024a01cf5ef9423c3aa775e
Destination status
direct_pdf
Official OEM PDF

What this passage proves

  • Item fitment — presser foot: Teflon Coated Foot (compatible)
(ESG-TF) Fits Groups A, B, D, G, H
Document
Baby Lock 2025 accessory brochure
Issuer
Baby Lock
Extraction
native
PDF page
23
Open source
Open cited PDF at page 23Open OEM source or support page
Advanced technical receipt
Asset SHA-256
558d3860e61aced8ff65613a0faa552289094dda731a8b1e02f6daeb674bdb0e
Locator
709e55cd4defdfb2a26ed339c3e2321d42d92380e802c4505725f489e629d09e
Destination status
direct_pdf

What is supported, and what remains open?

0 supported answers and 7 answers with conditions or remaining limits. Evidence coverage is not a probability of accuracy.

Unresolved owner questions (3)
  • Class and substitutes: Not established — Not yet verified: The reviewed pages do not establish bobbin class, dimensions, material or third-party interchangeability.
  • Exclusive system: Not established — Not yet verified: The cited instructions do not establish one exclusive needle system or third-party product fit.
  • Third party fit: Not established — Not yet verified: No standardized shank dimensions, adapters or third-party presser-foot fit established.

Report a correction or share an OEM source

Advanced provenance and dataset receipt

Public snapshot a1cc1aceef228fcf33329e37165ab888ce5b9fe3f13eb56967ae0fbf41d8d8a7

Catalog e156281c7d3048027b5ac89e7476be8f54dd5a9309505e96260b0455d3cd2a7e · exact native quotes only · dossier method sewgraph-model-dossier-v2